Dell Unity XT 480 Unity All Flash and Unity Hybrid Unity 480/F Unity 680/F Uni - Page 12
Install the DPE on the rails
View all Dell Unity XT 480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Figure 2. Installing the rails 5. Repeat for the other rail. Install the DPE on the rails Steps 1. Lift the enclosure and slide it onto the rails from the front of the cabinet. 2. Push the system into the rack until the slam latches engage and lock the system into the rack. Ensure that the enclosure is flush with the front of the rack, fully seated in the cabinet, and does not slide out. Figure 3. Installing the system in the enclosure 12 Installation Procedures
Figure 2. Installing the rails
5.
Repeat for the other rail.
Install the DPE on the rails
Steps
1.
Lift the enclosure and slide it onto the rails from the front of the cabinet.
2.
Push the system into the rack until the slam latches engage and lock the system into the rack.
Ensure that the enclosure is flush with the front of the rack, fully seated in the cabinet, and does not slide out.
Figure 3. Installing the system in the enclosure
12
Installation Procedures