Dell Unity XT 480 Unity All Flash and Unity Hybrid Unity 480/F Unity 680/F Uni - Page 38
DPE power supply LEDs, Remove a power supply
View all Dell Unity XT 480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
DPE power supply LEDs Use the fault LEDs to identify the faulted part. Figure 31. DPE power supply LEDs Table 3. DPE power supply LEDs LED AC power (input) Location DC power (output) Fault State Green Off Green Off Solid amber Off Description AC power is on. AC power is off. Verify source power DC power is on. DC power is off. Verify source power. Power supply or backup fault. Check cable connection. No fault. Remove a power supply About this task There are two power supplies. The power supplies are installed in the top and bottom SP assembly, and the top power supply is installed upside-down. This procedure works for removing either power supply, however, the direction in which the release handle is pressed is to the left for the bottom power supply, and to the right for the top power supply. NOTE: You do not need to power down the system to remove a power supply. Steps 1. Rotate the power cable retention bail to the left (to the right for the bottom power supply). Remove the power cable from the power supply. Figure 32. Removing the power cable 38 Service Procedures