Dell Unity XT 480 Unity All Flash and Unity Hybrid Unity 480/F Unity 680/F Uni - Page 73
Install the SP assembly, Securing the top cover
View all Dell Unity XT 480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Figure 80. Securing the top cover Install the SP assembly Steps 1. Align the pins on the top of the SP assembly with the grooves on the top of the chassis. 2. Slide the SP assembly into the chassis until it stops, about halfway in. Figure 81. Sliding the SP assembly halfway into the chassis 3. Pull the black release tab out completely, and slide the rest of the SP assembly back into the chassis. The black release tab slides back into the system as it is inserted. Service Procedures 73
Figure 80. Securing the top cover
Install the SP assembly
Steps
1.
Align the pins on the top of the SP assembly with the grooves on the top of the chassis.
2.
Slide the SP assembly into the chassis until it stops, about halfway in.
Figure 81. Sliding the SP assembly halfway into the chassis
3.
Pull the black release tab out completely, and slide the rest of the SP assembly back into the chassis.
The black release tab slides back into the system as it is inserted.
Service Procedures
73