Dell Unity XT 480 Unity All Flash and Unity Hybrid Unity 480/F Unity 680/F Uni - Page 37
Verifying the operation of the new part in Unisphere, Replace a power supply
View all Dell Unity XT 480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Figure 30. Installing a 2.5" drive Verifying the operation of the new part in Unisphere Verify that the new part is recognized by your system, and operating correctly. Steps 1. In Unisphere, select System View. 2. On the Summary page, confirm that the system status is OK. 3. Select the Enclosures page. 4. Verify that the part appears with the OK status in the enclosure view. You may need to refresh Unisphere by clicking on the refresh icon next to the Enclosures view. If the system health monitor shows the part as faulted, contact your service provider. Replace a power supply Take the following actions to remove the faulted power supply and install the replacement power supply into the system. Identifying and locating the faulted part in Unisphere Before you replace a faulted part, locate its placement within the storage system. Steps 1. In Unisphere, select System View. 2. Select the Enclosures page. 3. Locate the faulted part marked orange, and displayed in the Enclosures view. Service Procedures 37