Dell Unity XT 480 Unity All Flash and Unity Hybrid Unity 480/F Unity 680/F Uni - Page 79
Remove the faulted dual inline memory module, Install the dual inline memory module
View all Dell Unity XT 480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Figure 88. Removing the top cover Remove the faulted dual inline memory module Steps 1. Locate the faulted DIMM in the SP assembly. The DIMMs are identified by white or black retaining tabs. 2. Depress the white or black retaining tabs downward to free the DIMM from its slot. 3. Remove the faulted DIMM. Figure 89. Removing the DIMM Install the dual inline memory module Steps 1. Touching only the outside edges of the DIMM, align the DIMM with the connector. 2. Firmly push the carrier straight down into the connector. When the DIMM is fully seated, you will hear a snap, and feel the connector latches click into place. Service Procedures 79
Figure 88. Removing the top cover
Remove the faulted dual inline memory module
Steps
1.
Locate the faulted DIMM in the SP assembly.
The DIMMs are identified by white or black retaining tabs.
2.
Depress the white or black retaining tabs downward to free the DIMM from its slot.
3.
Remove the faulted DIMM.
Figure 89. Removing the DIMM
Install the dual inline memory module
Steps
1.
Touching only the outside edges of the DIMM, align the DIMM with the connector.
2.
Firmly push the carrier straight down into the connector.
When the DIMM is fully seated, you will hear a snap, and feel the connector latches click into place.
Service Procedures
79