Dell Unity XT 480 Unity All Flash and Unity Hybrid Unity 480/F Unity 680/F Uni - Page 22
Install the disk array enclosure, Install 15-drive DAE, Installing snap-in rails in the cabinet
View all Dell Unity XT 480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Component Rail kit, including Snap-in rails (2) Screws (3 per rail) Quantity 1 Power cords Bezel for disk-array enclosure (with key) CL5583 2 1 mini-SAS HD cables (either 2 1 meter or 2 meter copper) that connect disk-array enclosures to each other (1 meter cables) or to DPE (2 meter cables) Install the disk array enclosure There are two types of DAEs. One is a 3U 15 disk 3.5" drive DAE. The other is a 2U 25 disk 2.5" drive DAE. DAEs are optional. The installation procedures are slightly different for each. Install 15-drive DAE Installing snap-in rails in the cabinet About this task NOTE: The snap-in rails are dedicated left and right, and cannot be interchanged. The front edge of each rail is stamped L or R for left or right side when the rail faces the cabinet front. The snap-in rails have two key tabs at the top and bottom edge on the rear of each rail. The key tabs ensure that the rails are installed in the appropriate 2U space. Steps 1. From the rear of the cabinet, insert the two key tabs into the holes of the 2U-space on the rear cabinet channel. 22 Installation Procedures