Dell Unity XT 480 Unity All Flash and Unity Hybrid Unity 480/F Unity 680/F Uni - Page 87
Remove the faulted M.2 SSD, Removing the top cover
View all Dell Unity XT 480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Figure 100. Removing the top cover Remove the faulted M.2 SSD Steps 1. Locate the M.2 SSD adaptor in the SP assembly. You can identify the M.2 SSD adaptor by the blue retaining tabs. 2. Press the blue retaining tabs downward to free the M.2 SSD adaptor from its slot. 3. Touching only the outside edges of the M.2 SSD adaptor, remove the M.2 SSD adaptor. Figure 101. Removing the M.2 SSD adaptor 4. Identify the faulted M.2 SSD. One M.2 SSD is labeled DRIVE 0 and the other is labeled DRIVE 1. In , DRIVE 0 is identified as InternalM.2BootModule0 and DRIVE 1 is identified as InternalM.2BootModule1. 5. On the faulted M.2 SSD, gently pull the handle on the release tab to separate it from the tab holding it in place. 6. Gently pull straight up on the pull tab to free it from the M.2 SSD adaptor. 7. Remove the M.2 SSD from the M.2 SSD adaptor. Service Procedures 87