Dell Vostro 1510 Service Manual - Page 22

Camera and Microphone Assembly

Page 22 highlights

10. Replace the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover. Camera and Microphone Assembly Removing the Camera and Microphone Assembly CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. 1. Follow the instructions in Before Working on Your Computer. 2. Remove the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover. 3. Remove the WLAN card (see Removing a WLAN Card). 4. Remove the hinge cover (see Removing the Hinge Cover). 5. Remove the keyboard (see Removing the Keyboard). 6. Remove the display assembly (see Removing the Display Assembly). 7. Remove the display bezel (see Removing the Display Bezel). 8. Remove the M2 x 3-mm screw that secures the camera/microphone assembly. 9. Lift the camera/microphone out of the top cover and disconnect the camera/microphone cable. 1 M2 x 3-mm screw (1) Replacing the Camera and Microphone Assembly CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. This procedure assumes that you have completed the removal procedure Removing the Camera and Microphone Assembly. 1. Connect the camera/microphone cable to the connector on the camera/microphone assembly. 2. Position the camera/microphone in the top cover and replace the M2 x 3- mm screw that secures the camera/microphone assembly to the top cover. 3. Replace the display bezel (see Replacing the Display Bezel). 4. Replace the display assembly (see Replacing the Display Assembly).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

10.
Replace the hard drive cover. See
Removing the Hard Drive
for an illustration of the hard drive cover.
Camera and Microphone Assembly
Removing the Camera and Microphone Assembly
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the hard drive cover. See
Removing the Hard Drive
for an illustration of the hard drive cover.
3.
Remove the WLAN card (see
Removing a WLAN Card
).
4.
Remove the hinge cover (see
Removing the Hinge Cover
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the display bezel (see
Removing the Display Bezel
).
8.
Remove the M2 x 3-mm screw that secures the camera/microphone assembly.
9.
Lift the camera/microphone out of the top cover and disconnect the camera/microphone cable.
Replacing the Camera and Microphone Assembly
This procedure assumes that you have completed the removal procedure
Removing the Camera and Microphone Assembly
.
1.
Connect the camera/microphone cable to the connector on the camera/microphone assembly.
2.
Position the camera/microphone in the top cover and replace the M2 x 3- mm screw that secures the camera/microphone assembly to the top cover.
3.
Replace the display bezel (see
Replacing the Display Bezel
).
4.
Replace the display assembly (see
Replacing the Display Assembly
).
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
M2 x 3-mm screw (1)
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.