Dell Vostro 1510 Service Manual - Page 33
Removing the Keyboard, Replacing the Hinge Cover, Back to Contents
View all Dell Vostro 1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
This procedure assumes that you have completed the removal procedure Removing the Keyboard. 1. Slide the keyboard cable connector into the keyboard connector. on the system board. 2. Rotate the retaining bracket downward to secure the keyboard cable connector. 3. Hook the tabs along the front edge of the keyboard beneath the front- inside edge of the palm rest. 4. Press on the upper right edge of the keyboard to snap the keyboard into place. 5. Replace the two M2 x 3-mm screws at the top of the keyboard. 6. Replace the hinge cover (see Replacing the Hinge Cover). Back to Contents Page
This procedure assumes that you have completed the removal procedure
Removing the Keyboard
.
1.
Slide the keyboard cable connector into the keyboard connector. on the system board.
2.
Rotate the retaining bracket downward to secure the keyboard cable connector.
3.
Hook the tabs along the front edge of the keyboard beneath the front- inside edge of the palm rest.
4.
Press on the upper right edge of the keyboard to snap the keyboard into place.
5.
Replace the two M2 x 3-mm screws at the top of the keyboard.
6.
Replace the hinge cover (see
Replacing the Hinge Cover
).
Back to Contents Page