Dell Vostro 1510 Service Manual - Page 24
Removing the Fan, Replacing the Fan
View all Dell Vostro 1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Back to Contents Page Fan Dell™ Vostro™ 1510 Service Manual Removing the Fan Replacing the Fan Removing the Fan CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. 1. Follow the instructions in Before Working on Your Computer. 2. Loosen the two screws that secure the memory cover. (See Removing a Memory Module for an illustration of the memory cover.) 3. Slide the cover out of the compartment and set it aside. 4. Remove the three M2.5 x 5-mm screws that secure the fan to the base of the computer. 5. Disconnect the fan connector from the system board connector, and remove the fan. 1 fan 2 M2.5 x 5-mm screws (3) 3 fan connector Replacing the Fan CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. This procedure assumes that you have completed the removal procedure Removing the Fan. 1. Align the screw holes on the fan with the holes on the base of the computer. 2. Replace the three M2.5 x 5-mm screws to secure the fan to the base of the computer. 3. Connect the fan connector to the system board connector. 4. Replace the memory cover and tighten the screws. Back to Contents Page