Denon AVR-3312CI AVR3312CI_OwnersManual - Page 119
Option Setup, Preset 1, Tuner Preset Ch, Internet Radio
UPC - 883795002042
View all Denon AVR-3312CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Basic version Advanced version Information Option Setup Default settings are underlined. Make various other settings. Setting items Volume Control Set the MAIN ZONE (room where the unit is located) volume setting. Setting details Volume Display : Set how volume is displayed. • Relative : Display ---dB (Min), in the range -80.5 dB to 18 dB. • Absolute : Display in the range 0 (Min) to 99. Source Delete Remove from the display input sources that are not used. • The "Volume Display" setting is applied also to the "Volume Limit" and "Power On Level" display method. • The "Volume Display" setting applies to all zones. Volume Limit : Make a setting for maximum volume. • OFF : Do not set a maximum volume. • -20dB (61) / -10dB (71) / 0dB (81) Power On Level : Define the volume setting that is active when the power is turned on. • Last : Use the memorized setting from the last session 0) : Always use the muting on condition when power is turned on. • -80dB - 18dB (1 - 99) : The volume is adjusted to the set level. Mute Level : Set the amount of attenuation when muting is on. • Full : The sound is muted entirely. • -40dB : The sound is attenuated by 40 dB down. • -20dB : The sound is attenuated by 20 dB down. BD / DVD / TV / SAT/CBL / DVR / GAME1 / GAME2 / V.AUX / DOCK / NET/USB / TUNER / PHONO / CD : Select input source that is not used. • ON : Use this source. • Delete : Do not use this source. NOTE • Input sources being used in the various zones cannot be deleted. • Input sources set to "Delete" cannot be selected using the input source select button. SYSTEM SETUP Setting items Setting details GUI Make the settings related to displays on the TV screen. Screensaver : Make screensaver settings. • ON : The screensaver is activated during menu display, NET/USB, iPod or HD Radio screen display if no operation is performed for an approximately 5-minute continuous period. When you press uio p, the screensaver is cancelled and the screen before that screen saver started is displayed. • OFF : Screensaver is not activated. Wall Paper : Set wallpaper to display in the background when playback is stopped, etc. • Picture : Set the background to a picture (DENON logo). • Black : Set the background to black. • Gray : Set the background to gray. • Blue : Set the background to blue. Format : Set the video signal format to be output for the TV you are using. • NTSC : Select NTSC output. • PAL : Select PAL output. "Format" can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit's PRESET 1 and PRESET 3 for at least 3 seconds. "zVideo Format" appears on the display. 2. Press the main unit's TUNER PRESET CH +, - and set the video signal format. 3. Press the main unit's INTERNET RADIO V to complete the setting. NOTE When a format other than the video format of the connected TV is set, the picture will not be displayed properly. Text : Display the details of operation when switching surround mode, input mode, etc. • ON : Turn display on. • OFF : Turn display off. Master Volume : Display the master volume during adjustment. • Bottom : Display at the bottom. • Top : Display at the top. • OFF : Turn display off. When the master volume display is hard to see when superimposed on movie subtitles, set to "Top". vSee overleaf BD 116