Denon AVR-3312CI AVR3312CI_OwnersManual - Page 152
Resetting the microprocessor, ON/STANDBY, PRESET CHANNEL 3
UPC - 883795002042
View all Denon AVR-3312CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Basic version Advanced version Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. ON/STANDBY PRESET CHANNEL 2 PRESET CHANNEL 3 1 Turn off the power using ON/STANDBY. 2 Press ON/STANDBY while simultaneously pressing PRESET CHANNEL 2 and PRESET CHANNEL 3. 3 Once the display starts flashing at intervals of about 1 second, release the two buttons. If in step 3 the display does not flash at intervals of about 1 second, start over from step 1. Information 149
149
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
ON/STANDBY
PRESET CHANNEL 3
PRESET CHANNEL 2
1
Turn off the power using
ON/STANDBY
.
2
Press
ON/STANDBY
while simultaneously pressing
PRESET CHANNEL 2
and
PRESET CHANNEL 3
.
3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.