Epson Stylus Pro 7600 - UltraChrome Ink Service Manual - Page 16
EPSON Stylus Pro 7600/9600, Revision
View all Epson Stylus Pro 7600 - UltraChrome Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
EPSON Stylus Pro 7600/9600 Revision A BORDERLESS PRINT ROLL PAPER Borderless print for right and left is enssured for roll paper with any of the paper widths as specified in Figure 1-9 below. NOTE: 300 mm, 400 mm, 500 mm and 600 mm are supported for Europe. Paper width Table 1-8. Stylus Pro 7600 Stylus Pro 9600 Japan 8" USA/Europe 8" 210 mm 10" - 12" 210 300 10" 12" mm mm 14" - 16" - 20" - 24" 36" 44" 400 500 600 14" 16" 20" 24" 36" 44" mm mm mm Note 1: Paper should have no wrinkles, tears, or folds and the surface should be smooth. 2: The force to remove the end of the roll paper from the core should be between 300 gf and 2000 gf 3: If core is used, a product-exclusive option (roll paper spindle 3 inch) is necessary. 4: It is used under normal conditions. (temperature 15°C ~ 25°C, humidity 40 ~ 60%RH) 5: Roll paper can be printed before paper comes out of the core. (Reference: Remaining paper length is 30cm approx. when roll paper come out of the core.) 6: The mechanism clips print data out of over-printable area for borderless printing. 1.2.5.2 Sheet ACCEPTABLE PAPER The printer accepts following plain paper and special paper. With any other paper, proper paper feeding and satisfactory print quality are not ensured. Paper Size (The sizes indicated in bold italic are only for Stylus Pro 9600.) Table 1-9. Acceptable Sheet Sizes (Acceptable Paper) Paper Size Size (W × H) Paper Size Size (W × H) B0+* 1118 mm × 1580 mm A4 210 mm × 297 mm B0 * 1030 mm × 1456 mm US E 34 × 44 in B1 * 728 mm × 1030 mm US D 22 × 34 in B2 515 mm × 728 mm US C 17 × 22 in B3 364 mm × 515 mm US B 11 × 17 in B4 257 mm × 364 mm 44 × 36 in * 44 × 36 in A0+ * 914 mm × 1292 mm 30 × 24 in 30 × 24 in A0 * 841 mm × 1189 mm Letter 8.5 × 11 in A1+ 24 × 36 in B1 (wide) * 1030 × 728 mm A1 594m × 841 mm 8 × 10 in 8 × 10 in A2 420 mm × 594 mm 30 cm × 45 cm 30 cm × 45 cm A3+ 329 mm × 483 mm 60 cm × 90 cm 60 cm × 90 cm A3 297 mm × 420 mm Note "*": Only for Stylus Pro 9600 Thickness 0.08 ~ 1.5 mm (paper length: 279 mm ~ 728 mm) 0.08 ~ 0.5 mm (paper length: 728 mm ~ 1580 mm) NOTE 1: Paper should have no wrinkles, tears, or folds and the surface should be smooth. 2: 0.08 ~ 1.50 mm paper thickness is supported for long-edge insertion. 3: The sizes indicated in bold italic are only for Stylus Pro 9600. Product Description Basic Specifications 16