Epson Stylus Pro 7600 - UltraChrome Ink Service Manual - Page 85
Firmware Reload
View all Epson Stylus Pro 7600 - UltraChrome Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
EPSON Stylus Pro 7600/9600 1.4.7 Firmware Reload 1.4.7.1 Reload from ROM-DIMM Reload method from ROM-DIMM is following; 1. Write RCC format F/W file into ROM-DIMM (C309type). 2. Switch power OFF and unplug the cable. 3. Remove the rear cover and insert "1." ROM-DIMM into the exclusive slot. 4. Switch power ON. 5. Installation starts and finishes automatically. 6. Switch power OFF and unplug the cable. 7. Remove ROM-DIMM from exclusive slot. 8. Switch power ON. 1.4.7.2 Reload with F/W DOWNLOAD mode Reload method via parallel interface is following; 1. Connect the printer to the host with a parallel cable. 2. Switch power ON pushing Enter + Paper Source + Cleaning buttons. 3. Check the printer panel displays "F/W DOWNLOAD". 4. Send UPG format F/W file from the host. 5. Installation is completed. 6. Restart the printer (Power Off → Power On) 1.4.7.3 Installation with service utility (F/W Update function) Installation via parallel interface is following; 1. Connect the printer to the host with a parallel cable. 2. Switch power ON. 3. Check that the printer panel displays "READY". 4. Send UPG format F/W file from the host service utility. 5. Installation is completed. 6. The printer restarts automatically. Revision A 1.4.7.4 Compulsory start F/W DOWNLOAD mode When F/W installation fails for some reasons and start up from begins the backup area, F/W DOWNLOAD mode is automatically selected. See above for more information about F/W DOWNLOAD mode. NOTE: This mode is released when F/W installation is completed properly. Product Description Operating Panel 85