Epson Stylus Pro 7600 - UltraChrome Ink Service Manual - Page 165
H Top Cover
View all Epson Stylus Pro 7600 - UltraChrome Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
EPSON Stylus Pro 7600/9600 4.2.5 H Top Cover 1. Remove the R Side Cover. (p.160) 2. Remove the L Side Cover. (p.163) 3. Remove the I/H Cover. (p.164) 4. Open the Front Cover. 5. From the left side, remove one screw (CUPS: M4×8). (See Figure 4-14) 6. Remove the screw (CUPS: M4×8) at the front left of the printer. 7. Remove the screw (CUPS: M4×8) at the front right of the printer. 8. From the right side, remove one screw (CUPS: M4×8). (See Figure 4-15) 9. To avoid damaging the P_THICK Sensor or P_THICK_0.3 Sensor, bring down the Paper Set Lever toward you (to the paper holding position). 10. Pull up the H Top Cover rearward and remove it. In doing so, take care not to lose the plate which is also locked with the front left screw. C A U T IO N When removing the H Top Cover, care should be taken not to damage the P_THICK Sensor and P_THICK Sensor_0.3. To avoid damaging them, bring down the Paper Set Lever toward you (to the paper holding position) first and shift the H Top Cover rearward in an oblique direction for its removal. Revision A Screws (CUPS: M4×8) ×2 Screw (CUPS: M4×8) Figure 4-14. H Top Cover Removal on left side Screw (CUPS: M4×8) Screw (CUPS: M4×8) Disassembly & Assembly Plate Figure 4-15. H Top Cover Removal on right side Removing the Panel Unit and Housing 165