Epson Stylus Pro 7600 - UltraChrome Ink Service Manual - Page 96
Optional Interface
View all Epson Stylus Pro 7600 - UltraChrome Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
EPSON Stylus Pro 7600/9600 1.6.3 Optional Interface Type-B interface (level 2, 1200mA type) is supported. REPLY MESSAGE (Case of using Type-B I/F card except above) Card in Type-B slot 1: Main-Type Stylus Pro 7600: MT48p,PW240cl10cpi,PRG(BNxxxx)rev,AP800ma,SPD0fast,GDI Stylus Pro 9600: MT48p,PW440cl10cpi,PRG(BWxxxx)rev,AP800ma,SPD0fast,GDI NOTE: xxxx is F/W version. Product-Name: Emulation-Type : ESCPL2-00 Entity-Type : EPSONLQ2 Revision A REPLY FOR OPTION COMMAND Table 1-58. Reply List Option command number Command name Reply-A Reply-B 00h No-operation Accept None 01h Start Hardware Reset Accept Execute OK 02h Start Software Reset Reject 03h Send Main System Type Accept 04h Send Name Data Reject 05h Inquire Name Data Accept 06h Send Product Name Accept 07h Send Software Emulation Type Accept 08h Complete Buffered Data Accept Check Condition 09h Stop Procedure Reject Execute OK 0Ah Return Buffered Data Reject 0Bh Send Entity Type Accept 0Ch Send Status Accept 0Dh Quit Procedure Reject 0Eh Inquire ASCII Message Reject 0Fh Send ASCII Message Accept None 10h-13h Unknown None 14h Inquire Emergency Message Accept Execute OK 15h Send Emergency Reply Accept 16h-1Fh Unknown None 20h-FFh Reserved None Product Description Interfaces 96