Garmin RINO 130 Owner's Manual

Garmin RINO 130 - Hiking GPS Receiver Manual

Get Garmin RINO 130 - Hiking GPS Receiver PDF manuals and user guides
UPC - 753759031978
View all Garmin RINO 130 manuals
Add to My Manuals
Save this manual to your list of manuals

Garmin RINO 130 manual content summary:

  • Garmin RINO 130 | Owner's Manual - Page 1
    130 2-way radio & personal navigator ® owner's manual
  • Garmin RINO 130 | Owner's Manual - Page 2
    or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin®, AutoLocate®, Personal Navigator®, MapSource®, TracBack®, BlueChart®, and Rino® are registered trademarks of
  • Garmin RINO 130 | Owner's Manual - Page 3
    Thank you for choosing the Garmin® Rino® 130 (Radio Integrated with Navigation for the Outdoors). To get the most from your new Rino 130, read through the Quick Start Guide first, then this Owner's Manual to understand all of the operating features. The Quick Start Guide describes the process of
  • Garmin RINO 130 | Owner's Manual - Page 4
    19 Using the Rino 130 Radio Features 20 Peer-to-Peer Positioning 20 New Contact Page Overview 20 Sending a Location 23 Map Page 24 Map Page Options 26 Using the Pan Map Option 27 Programming the Data Fields 28 Setting up the Map 29 Measuring Distance 31 Navigation Page 32 Using
  • Garmin RINO 130 | Owner's Manual - Page 5
    Place 61 Weather Radio 62 Sending a Note 63 Using a Goto 64 Rino® 130 Owner's Manual INTRODUCTION > TABLE OF CONTENTS Routes Page 65 Creating and Using a Route 65 Editing a Route 66 Adding or Editing from the Route Map Page 69 Navigating a Route 70 Stopping Navigation 71 Data Fields for
  • Garmin RINO 130 | Owner's Manual - Page 6
    101 Physical 101 Performance 101 iv Radio 102 Power 102 Accessories 103 Transferring MapSource Data 104 GPS Troubleshooting Guide 106 Radio Troubleshooting Guide 107 FRS Frequency Chart 108 Weather Radio Frequency Chart 108 GMRS Frequency Chart 109 Data Field Definitions 110 Interface
  • Garmin RINO 130 | Owner's Manual - Page 7
    easy viewing. Rino® 130 Owner's Manual GETTING STARTED > GETTING TO KNOW YOUR RINO 130 The unit contains built-in cartography of a North American basemap that includes Interstate and State Highways and Exit Information. Using MapSource®, Garmin's map data software (not included), the Rino 130 could
  • Garmin RINO 130 | Owner's Manual - Page 8
    panning arrow • Press In and hold to display Shortcuts Menu. Zoom/Map (Z) button: • From the Map Page, press to open Zoom control window • From any other page, press to display Map Page and press again to open Zoom control Microphone: • Hold unit 3-4 inches away when talking Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 9
    Rino 130 2-way FRS/GMRS Antenna Belt Clip Connector Mount Headset Connector with Weather cap Mount Alignment Notches Rino® 130 Owner's Manual GETTING STARTED > BACK OF THE RINO 130 GPS Antenna External Power And Data Connector with Weather cap Battery Compartment D-Ring Battery Compartment Cover
  • Garmin RINO 130 | Owner's Manual - Page 10
    Page, Trip Computer, and Main Menu Page. You can also access the Main Pages by pressing the on-screen Main Page button . Customize the Main Page sequence through the Main Menu (see page 45). Radio Page Map Page Navigation Page Main Menu 4 Trip Computer Altimeter Page Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 11
    initialize the GPS receiver in your Rino 130 unit before you use it the first time. See page 7 for instructions on initializing the unit. For enter data, or move the map panning arrow • Press In and hold to display Shortcuts Menu. Rino® 130 Owner's Manual GETTING STARTED > OPERATING THE RINO 130 To
  • Garmin RINO 130 | Owner's Manual - Page 12
    Receiving Radio signal Transmitting Radio signal Backlight On Radio On 6 Peer-To-Peer On/Location Ready to Send Keylock On Alarm Clock On GPS On, Position Ready GPS On, Position Not Ready Compass On (Press and hold the Zoom key to turn the compass on/off) Weather Alert On Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 13
    be initialized. The initialization process allows the Rino 130 to receive and store satellite information and begin using the satellites for navigation. Initialization is automatic, should only take a few minutes, and only needs to be done the first time the unit is used. Rino® 130 Owner's Manual 7
  • Garmin RINO 130 | Owner's Manual - Page 14
    GPS is initialized and ready for navigation, the message "3D Accuracy" is displayed on the Radio Page. Using My ID and Symbol Fields The My ID field allows you to enter a name and symbol that appears on other Rino units as . You may enter up to 10 characters for your ID. 8 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 15
    UNIT OPERATION > RADIO PAGE Entering a name with the on-screen keyboard Changing the user symbol 4. When you have entered your new ID, use the method may also be used on other selection windows. 3. Once you have highlighted the desired icon, press the Thumb Stick In. Rino® 130 Owner's Manual 9
  • Garmin RINO 130 | Owner's Manual - Page 16
    channel and squelch code. Garmin Rino units work with 3rd party FRS/GMRS radios, provided the other radios use standard FRS/ GMRS frequencies. A chart of Rino frequencies may be found in you only hear the radios you want to hear. Squelch Codes are not a scrambling system! Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 17
    Appendix" for more information on FRS/GMRS and its operational aspects. UNIT OPERATION > RADIO PAGE Choose from 38 squelch codes. Setting the unit to zero will allow you to hear all transmissions on that channel the desired selection, press the Thumb Stick In. Rino® 130 Owner's Manual 11
  • Garmin RINO 130 | Owner's Manual - Page 18
    UNIT OPERATION > RADIO PAGE Scanning and Monitoring The Scan option allows you to scan through the available channels for voice activity. As the unit scans and receives a signal (or if you transmit), it stops on that channel/squelch code for a few seconds, then continues scanning. When the Rino 130
  • Garmin RINO 130 | Owner's Manual - Page 19
    Option Menu provides the following: Setup Radio, Setup Tones, Setup Scanlist, Use Weather Radio/Use FRS/GMRS Radio, Turn Radio Off/On, Turn GPS Off/On, and Enable Weather Alert. Refer to the following pages for explanations of each item in the Radio Page Option Menu. Rino® 130 Owner's Manual 13
  • Garmin RINO 130 | Owner's Manual - Page 20
    in the headset when transmitting successfully using VOX. Scramble-Adds a level of security to your conversations with other Rino 120 or 130 users only. When On, the voice transmission sounds garbled to other non-scrambled Rino units, as well as other 3rd party radios. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 21
    ) button, it must be pressed for the unit to detect the headset. You must obtain a license to operate on GMRS channels 15-22 in the U.S. Microphone Sensitivity-Allows you to set the sensitivity of the internal microphone and the sensitivity of a headset microphone. Rino® 130 Owner's Manual 15
  • Garmin RINO 130 | Owner's Manual - Page 22
    and off. 16 Message Tone-Choose from On or Off to have the unit emit a tone when a message or note is received. Setup Tones Page Setup Scanlist Refer to "Scanning and Monitoring" for complete information about this feature and the options in this page. Setup Scanlist Page Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 23
    When the Weather Radio is on, Enable Weather Alert is added at the bottom of the Option Menu. Press the Thumb Stick In when Enable Weather Alert is highlighted to turn the feature on. You can then turn the Weather Radio off and continue normal FRS/GMRS radio operations. Rino® 130 Owner's Manual 17
  • Garmin RINO 130 | Owner's Manual - Page 24
    As radio signals come in, signal wave symbols display to the left of Mark Waypoint. Fragmented (or broken) signal symbols are shown to indicate activity on that channel. Audio remains muted because the incoming signal does not match the squelch code your unit is set to. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 25
    on GMRS GPS and FRS/GMRS Radio On; Ready to transmit Position; Position received from other Rino user GPS Off; FRS/GMRS Radio On; Position sending not available GPS and FRS/GMRS Radio On; Position transmitted GPS On; FRS/GMRS Radio Off; GPS operation only Rino® 130 Owner's Manual 19
  • Garmin RINO 130 | Owner's Manual - Page 26
    > USING THE RINO 130 RADIO FEATURES Using the Rino 130 Radio Features Your Rino 130 unit provides many features to enhance your radio experience, such as transmitting your location or any location and receiving contact information. This section reviews some of the advanced radio features. Refer to
  • Garmin RINO 130 | Owner's Manual - Page 27
    on the Thumb Stick to change to the next data field. UNIT OPERATION > USING THE RINO 130 RADIO FEATURES Press Left or Right on the Thumb Stick to view different contact data. To accept a new contact: 1. When a new contact is received, the New Contact page automatically appears. 2. Highlight OK and
  • Garmin RINO 130 | Owner's Manual - Page 28
    Thumb Stick In to start changing the data. 3. Highlight OK and press In when done. To view a contact on the Map Page: 1. From the Contact Review Page, highlight Map and press the Thumb Stick In. 2. Press the Page button when done to return to the Contact Review Page. 22 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 29
    Menu from the Waypoint Review Page and press In. UNIT OPERATION > USING THE RINO 130 RADIO FEATURES To send a unit now sends the point to the other Rino users on your channel/squelch code. If using the Scramble feature, receiving radios must also have Scramble enabled. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 30
    residential streets, parks, etc.), if Garmin MapSource data has been downloaded to the unit using a CD-ROM mapping program. When using MapSource data, the word "mapsource" displays below the map scale whenever you zoom in to view map details. map resolution and GPS accuracy in defining your location
  • Garmin RINO 130 | Owner's Manual - Page 31
    you to zoom in and out on the map. Press the Z (Zoom) button from any page (other than the Map Page) to open the Map Page. Press Up to Zoom Out; press Down to Zoom In Rino® 130 Owner's Manual UNIT OPERATION > MAP PAGE To change scales on the Map Page: 1. Press the Z (Zoom) button to open the
  • Garmin RINO 130 | Owner's Manual - Page 32
    size, map orientation, and map detail. Refer to the "Setting up the Map" section for complete instructions. Measure Distance-Displays the distance from one point on the map to another. Restore Defaults-Returns the Map Page to the original factory settings (defaults). 26 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 33
    map display, the map also moves to reveal more area and a busy hourglass appears by the cursor while the data is drawn on the screen. Whenever you place the panning arrow on a map save it as a waypoint, set a proximity Rino® 130 Owner's Manual UNIT OPERATION > MAP PAGE circle around it, add it to a
  • Garmin RINO 130 | Owner's Manual - Page 34
    data field type. Changing Data Fields Data Field Options Thee data field options apply to the Map Page data fields and the Trip Computer data fields. For definitions of these all data fields used in the Rino 130 Trip Computer Only Location (lat/lon) Location (selected) 28 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 35
    Map Data Setup To use Map Setup options: 1. Select Setup Map from the Option Menu and then press the Thumb Stick In to display the Map displays the options list for that sub-page to the left. UNIT OPERATION > MAP PAGE 3. Press Left, then Up or Down on the Map Page. Rino® 130 Owner's Manual 29
  • Garmin RINO 130 | Owner's Manual - Page 36
    active Track Points allowed Map Features Setup Points of Interest, Waypoints, Street Label, and Land Cover-Off, Auto, or 20 ft-500 miles, sets the maximum scale at which that feature should appear on the screen. Some types of data display only at certain zoom scales. 30 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 37
    began the measuring. 3. To begin measuring from a different point, press the Thumb Stick In at the desired location. 4. To stop measuring, press the Page button. Map Pointer Field Measuring distance Rino® 130 Owner's Manual 31
  • Garmin RINO 130 | Owner's Manual - Page 38
    . Using the Navigation Page The two main components of the Navigation page are the Bearing Pointer and Compass Ring. The Bearing Pointer always points directly to the destination, no matter what your current location might be. The Compass Ring displays your heading. 32 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 39
    your heading UNIT OPERATION > NAVIGATION PAGE while you are moving, but the data fields to navigating: 1. Highlight the on-screen Option Menu button at the top of the Navigation or Map Page and press the Thumb Stick. 2. Select Stop Navigation, then press the Thumb Stick. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 40
    Stick to highlight the desired data field and then press it In to display the list of data options. 2. Select the desired option from the list and press the Thumb Stick In. The list of data field choices may be found on page 28 and definitions may be found in the "Appendix." Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 41
    outdoors when you first use the Rino 130 and after new batteries have been installed. The accuracy of the Electronic Compass is adversely affected if the unit is not held level or is held near items that generate magnetic fields, such as cars, large belt buckles, etc. Rino® 130 Owner's Manual 35
  • Garmin RINO 130 | Owner's Manual - Page 42
    Failed" message displays, repeat the process. When you manually turn the Compass Off, it stays off until you manually turn it On again. Sometimes, however, when you turn the Compass On, the Rino 130 overrides the Compass and uses the GPS receiver to track your heading. The criteria for switching
  • Garmin RINO 130 | Owner's Manual - Page 43
    UNIT OPERATION > ALTIMETER PAGE Altimeter Page The Altimeter Page provides the Data Fields Status Window is located at the top of the page and displays the current elevation and your current rate of ascent or descent when moving. It can also display the ambient pressure. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 44
    UNIT OPERATION > data. Calibrate Altimeter-Increases the accuracy of the altimeter. You must know your elevation or pressure to calibrate the altimeter. Restore Defaults-Returns the Altimeter Page to the original factory settings (defaults). Altimeter Page Option Menu 38 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 45
    you can plot a profile of elevation changes that occur as you navigate over a set distance or period of time. When you select View Pressure or time when you display the View Elevation Plot. You may Rino® 130 Owner's Manual UNIT OPERATION > ALTIMETER PAGE change the ranges for the vertical distance
  • Garmin RINO 130 | Owner's Manual - Page 46
    UNIT OPERATION > ALTIMETER PAGE Viewing Points The View Points option allows you to scroll through the stored elevation profile and to view a check mark in the box next to a selected item. 3. Move to the Apply button and press the Thumb Stick In to reset the data fields. 40 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 47
    UNIT data field: 1. Use the Thumb Stick to highlight the desired data field and then press it In to open the data field option pop-up window. 2. Use the Thumb Stick to move Up or Down the menu to highlight a desired data option and then press In to place it in the data field. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 48
    and Restore Defaults. Reset-Clears recorded data from the page to begin recording new data. Big/Small Numbers-Changes the display from seven small data fields to two large data fields. Restore Defaults-Returns the Trip Computer Page to the original factory settings (defaults). Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 49
    for a complete description of the items accessed through the Main Menu. Rino® 130 Owner's Manual UNIT OPERATION > MAIN MENU PAGE Mark Waypoint Page-Allows you to mark and store a waypoint for your current location or a map pointer location. Find 'N Go Menu-Allows you to locate and Goto Waypoints
  • Garmin RINO 130 | Owner's Manual - Page 50
    of items such as time format, units of measure, display backlighting timeout and contrast adjustment, heading selection, interface setups, and system software information. Calendar Page-Provides you "Features" section. Refer to the specific section for more information. 44 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 51
    Pages, plus additional pages. The default Main pages are Radio, Map, Navigation, Altimeter, Trip Computer, and Main Menu. The Main Menu cannot be removed the desired position is displayed and press the Thumb Stick In. Rino® 130 Owner's Manual UNIT OPERATION > MAIN MENU PAGE 3. To insert a new page,
  • Garmin RINO 130 | Owner's Manual - Page 52
    into the Rino 130. Weather Radio-Toggles between the Weather Radio and the FRS/GMRS Radio. Send Note-Sends a note to other Rino 130 users. Enable Keylock-Enables keylock so buttons are not inadvertently pushed. Press and hold the Page button to unlock the buttons. 46 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 53
    ways to create, edit, and use waypoints. Using the Mark Waypoint Page and the Find 'N Go Menu are two common pages for creating and editing waypoint. You can also create a waypoint using the Map Page. The Rino 130 Mark Waypoint Page Rino® 130 Owner's Manual UNIT OPERATION > WAYPOINTS data field. 47
  • Garmin RINO 130 | Owner's Manual - Page 54
    UNIT OPERATION > WAYPOINTS Creating Waypoints To create a waypoint for a map feature: 1. With the Pan Map feature active, move the panning arrow (map pointer) to the map item you want and highlight it. 2. Press may also change the waypoint name and/or symbol or add notes. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 55
    Stick In to display the keyboard. (For Notes, highlight Edit and press In to start entering data, up to 30 characters.) Select OK and press the Thumb Stick In to finish. 3. Highlight the OK button the press the Thumb Stick to save the changes. Project Waypoint Page Rino® 130 Owner's Manual 49
  • Garmin RINO 130 | Owner's Manual - Page 56
    UNIT OPERATION > WAYPOINTS map or selected from the Find 'N Go Menu). 2. Open the Option Menu at the top of the page, select Save As Waypoint. 3. Press the Thumb Stick In to save the item to the Waypoints List. 4. Highlight Save As Waypoint and press the Thumb Stick In. 50 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 57
    the selected category, while the Nearest list contains only those items that are near to your Current Location or the Map Pointer. These pages are structured with a set of sub-menus and location information pages that guide you through the process of finding locations. Rino® 130 Owner's Manual 51
  • Garmin RINO 130 | Owner's Manual - Page 58
    to the waypoint. Select Map to view the waypoint location on the map or select Delete to delete Rino users), Project Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), View Hunt & Fish (reports for that waypoint), or Reposition Here. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 59
    UNIT Map to view the waypoint location on the map Rino users), Project Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), View Hunt & Fish (reports for that waypoint), or Reposition Here. Entering a waypoint name to find By Name Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 60
    UNIT OPERATION > FIND 'N GO Finding a Contact Contacts that you have received in the Rino 130 can be found by selecting the 'Contacts' option from the Find 'N Go Menu. If the contact did not have a GPS location on the last transmission, a question (?) mark appears below the flag. To view the contact
  • Garmin RINO 130 | Owner's Manual - Page 61
    the keyboard as an alternative scrolling through the list of nearest cities. If you are currently panning the map, the option Near Map Pointer appears in place of the Nearest option. Rino® 130 Owner's Manual UNIT OPERATION > FIND 'N GO 2. If using find By Name, begin spelling the name of the city by
  • Garmin RINO 130 | Owner's Manual - Page 62
    the Option Menu button to access additional features. You can select: Send Location (to other Rino users), Project Waypoint, Save as a Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), or View Hunt & Fish (reports for that waypoint). Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 63
    , you must have transferred a MapSource MetroGuide map to the unit map database. Otherwise, this option, • Entertainment • Shopping • Services • Transportation • Emergency & Govt. • Manmade Places UNIT OPERATION > FIND 'N GO Map; or use the Option Menu for more choices. Rino® 130 Owner's Manual 57
  • Garmin RINO 130 | Owner's Manual - Page 64
    UNIT buttons to Goto or view on the Map, or use the page Option Menu. 7. Press the Rino users), Project Waypoint, Save as a Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), or View Hunt & Fish (reports for that waypoint). 58 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 65
    . To use these options, however, you must be using a MapSource product that provides this type of map data. To locate an address: 1. Use the Thumb Stick to highlight view the item on the Map, OK to close, or use the Option Menu for other choices. Entering an Address Rino® 130 Owner's Manual 59
  • Garmin RINO 130 | Owner's Manual - Page 66
    in the name field at the top of the list using the keyboard data entry method discussed in the Quick Start Guide. Once you have spelled enough of the street name, a list of matches Goto, view the item on the Map, OK to close, or use the Option Menu for other choices. 60 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 67
    then press it In. Sub-page buttons Last Found Places Page Rino® 130 Owner's Manual UNIT OPERATION > FIND 'N GO 2. Press Up or Down on Goto to create a direct line of travel to the item. Select Map to view the waypoint location or select OK. For Waypoints and Contacts data for this time and date. 61
  • Garmin RINO 130 | Owner's Manual - Page 68
    Radio off and continue normal FRS/GMRS radio operations. When a Weather Alert is detected, the Rino 130 will break into any FRS/GMRS transmission to automatically turn on the Weather Radio and broadcast that alert. Select Disable Weather Alert to turn off that feature. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 69
    in the Edit Note field. Press the Thumb Stick In to edit the Saved Note. Refer to the Quick Start Guide for information on entering data using the on-screen keyboard. Rino® 130 Owner's Manual UNIT OPERATION > SENDING A NOTE When you are done editing the note, push the Thumb Stick In when OK is
  • Garmin RINO 130 | Owner's Manual - Page 70
    past the destination the Bearing Pointer reverses and the distance increases. To stop navigation, select the on-screen Option Menu button at the top of the Navigation or Map Page. Select Stop Navigation, then press the Thumb Stick In. Viewing a Goto on the Map Page 64 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 71
    The Rino 130 stores 20 routes, each with up to 50 waypoints. A route can be created and modified from the Route Page, and waypoints can be added to a route from the Find 'N Go Menu. More complex routes can be created using a PC and MapSource mapping programs and then transferred to the unit's memory
  • Garmin RINO 130 | Owner's Manual - Page 72
    UNIT OPERATION > ROUTES PAGE To add a Find 'N Go Menu item to a route: 1. Select an item from the Find 'N Go Menu and display its Information Page. If a contact is used in a route, the route changes as the contact's position is updated the original order, repeat this process. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 73
    Menu button and press the Thumb Stick In to access the Option Menu. Rino® 130 Owner's Manual UNIT OPERATION > ROUTES PAGE 2. Select Restore Defaults and then press the Thumb Stick In to restore factory settings. To review a route point: 1. Select the point from the Route Points List and press the
  • Garmin RINO 130 | Owner's Manual - Page 74
    UNIT OPERATION > ROUTES PAGE 3. With the new point highlighted, press the Thumb Stick In to display the Information Page for the new point and then select the on-screen OK button to add it the route. Route point review on-screen Use button to replace the old route waypoint. To Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 75
    point. UNIT OPERATION > ROUTES PAGE 5. Press the on-screen Use button to return to the map page and then press the Thumb Stick In again to place the new waypoint. To add a route point within a route: 1. Follow steps 1 and 2 in the previous instructions Map. Rino® 130 Owner's Manual 69
  • Garmin RINO 130 | Owner's Manual - Page 76
    In to begin navigating the route. The screen changes to the Navigation Page. 3. Move to the Map Page to view the route and your current location. 4. Begin moving, watching directional information on the Navigation Page or your progress on the Map Page. Route Navigation 70 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 77
    that option for the selected data field. UNIT OPERATION > ROUTES PAGE Changing the Route Data Fields Data field Options for Route Page • Distance to Point • ETA To Point • ETE To Point • Leg Course • Leg Distance • Leg Time • Pointer • Sunrise At Point • Sunset At Point Rino® 130 Owner's Manual 71
  • Garmin RINO 130 | Owner's Manual - Page 78
    log and display the Track Page. The Track Page shows the track name (which can be renamed using the keyboard for data entry), the total distance of the track, track area (if available), a Show on Map option, and on-screen buttons for Map, OK, and Tracback. Tracks Page 72 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 79
    10,000 points. The Saved Track Page displays the track and it can also be displayed on the Main Map Page as you navigate. You may save up to 20 tracks with 250 points per track in the unit. Saved Contact tracks count towards this total. Tracks are marked BEGIN and END. Rino® 130 Owner's Manual 73
  • Garmin RINO 130 | Owner's Manual - Page 80
    Highlight the desired option and press the Thumb Stick In to enable. 3. Use the Map Page or the Navigation Page to navigate the Track. Setting up the Track Log You can set the track recording interval to Distance options change to accommodate the Record Method choices. 74 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 81
    areas or to alert you when you have strayed too far away from other Rino users. Up to ten waypoints may be listed, with a maximum alarm . Rino® 130 Owner's Manual UNIT OPERATION > PROXIMITY PAGE Highlight an item from the list and press the Thumb Stick In to open the item. 2. From the Review Page
  • Garmin RINO 130 | Owner's Manual - Page 82
    of satellite signal tracking, tells you when the unit is ready for navigation, and shows your location coordinates. To access the Satellites and their signals appear as hollow shapes until a signal is received and then they appear darkened in. The stronger the signal, the Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 83
    WAAS satellites near your location and then receives data for correcting differentials in the GPS satellite signals. WAAS satellite numbers begin at unit displays a "Poor Satellite Reception" message with four options: Use with GPS Off-Select this option if you want GPS off. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 84
    You can enter data, create routes, etc., but cannot navigate in this mode. Track Up/North Up-You can orient the satellite skyview by selecting 'Track Up' (your direction of travel) or 'North Up' (the satellite skyview oriented to the north). Satellite Page Option Menu 78 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 85
    130 determines your new location automatically. If you choose Use Map a map page displays with instructions stating, "Point to your approximate location and press ENTER". Use the Thumb Stick to move the map pointer to your location on the map and press the Thumb Stick In. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 86
    Setup Pages The Setup Pages allow you to customize the Rino 130 to your personal preferences. You can choose time settings, units of measure, display backlighting and contrast settings, heading ) or 24hour time format ( a 24- hour cycle, also called Military Time). 80 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 87
    list and then press the Thumb Stick In. Rino® 130 Owner's Manual UNIT OPERATION > SETUP PAGES 6. If you choose Units Setup Page The Units features are best used by individuals with a working knowledge of map grids and datums. To learn more about these subjects, visit the National Imagery and Mapping
  • Garmin RINO 130 | Owner's Manual - Page 88
    the unit does not rely on the LORAN signal for navigation, it can reference a different GRI chain and/or secondary stations and still navigate may download Garmin's Loran TD Position Format Handbook from the Garmin web site at http://www.garmin.com/support/ userManual.jsp. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 89
    map. If you are comparing GPS coordinates to a paper map, chart, or other reference, the map datum in this field must match the horizontal map datum used to generate the map units of measure to display your rate of travel. Elevation/Vertical Speed-Choose from two units Rino® 130 Owner's Manual 83
  • Garmin RINO 130 | Owner's Manual - Page 90
    UNIT OPERATION > SETUP PAGES Contrast Adjustment-Can be adjusted from light to dark using the slider adjacent to the contrast bar. To access Menu. 2. In the Main Menu, scroll down and select Setup. 3. Select the Heading icon to open the Heading Setup page. Heading Setup Page Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 91
    to activate. Rino® 130 Owner's Manual UNIT OPERATION > SETUP PAGES Interface Setup Page The Interface Settings Page allows you to choose from different input/output serial data formats. This feature is used when connecting to external NMEA devices, a DGPS beacon receiver, a personal computer, etc
  • Garmin RINO 130 | Owner's Manual - Page 92
    to manually tune the receiver. Refer to the beacon receiver instructions. To select a serial data format: 1. Highlight the Serial Data Format field and then press the Thumb Stick In. 2. Highlight an option and then press the Thumb Stick In to activate it. Interface Setup Page Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 93
    and the Unit I.D. Number. Software updates and instructions for downloading are available from the Garmin Web site (www.garmin.com). Rino® 130 Owner's Manual System Setup Page UNIT OPERATION > SETUP PAGES Choose one of the four GPS options other than Normal to significantly save battery power
  • Garmin RINO 130 | Owner's Manual - Page 94
    UNIT OPERATION > CALENDAR Calendar This feature provides you with a monthly calendar with programmable reference notes. You can display one monthly calendar at a time and add reference notes using the data and select New Note to begin entering text from the keyboard. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 95
    a note UNIT OPERATION > Review the note in the note window below the calendar. 3. Press the Thumb Stick In to display the pop-up menu. 4. Select View Sun & Moon to view the Sun & Moon Page for that date. Select View Hunt & Fish to view the Hunt & Fish Page for that date. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 96
    to enter alarm times in the same time format (UTC or local) you are using for your system. The unit must be on for the alarm clock to work. To access the Alarm Clock: 1. Press the Page button or " appears on the screen. Press the Thumb Stick In to acknowledge the alarm. 90 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 97
    off the Rino 130. To access the Calculator: 1. Press the Page button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select Calculator. UNIT OPERATION > CALCULATOR the calculator, enter numbers, and perform calculations. Calculator Page Rino® 130 Owner's Manual 91
  • Garmin RINO 130 | Owner's Manual - Page 98
    For example, if you set the lap distance to one mile, the unit records the time it takes you to travel one mile. To access the distance by selecting Set Lap Distance. To return to manually marking each lap, open the Option Menu and select the Lap by Button Press option. 92 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 99
    to begin data entry of Stick In. UNIT OPERATION > SUN Map, a map page displays. Use the map pointer to identify the desired location and then press In on the Thumb Stick. If you choose Use Find 'N Go Menu follow instructions in the Find 'N Go section. Sun & Moon Page Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 100
    UNIT then press In on the Thumb Stick to begin data entry of individual characters. Hunt & Fish Page 2. Map, a map page displays. Use the map pointer to identify the desired location and then press In on the Thumb Stick. If you choose Use Find 'N Go Menu follow instructions Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 101
    area: 1. Be sure the Rino 130 has a GPS fix. 2. Press Start when Rino® 130 Owner's Manual UNIT OPERATION > AREA CALCULATOR Area Calculation Page To review the area of a saved track: 1. On the Tracks page, highlight a Saved Track. 2. Press the Thumb Stick In to see a map with the area shown in a data
  • Garmin RINO 130 | Owner's Manual - Page 102
    UNIT OPERATION > GAMES Games The Games Page includes Memory Race, Waypoint Bomber, Clothesline, Assimilation and Beast Hunt. Highlight the appropriate icon and then press the Thumb Stick In to play the desired game. Brief instructions screen and press the Thumb Stick In. 96 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 103
    map page using your Thumb Stick. When you think an opponent is close to your cursor, drop a bomb. The receiving radio shows an "Incoming" message. If the receiving radio their radio, or play until someone gets a specified number of hits (that person loses). UNIT OPERATION Rino® 130 Owner's Manual 97
  • Garmin RINO 130 | Owner's Manual - Page 104
    UNIT own rules and enjoy! pits while navigating a maze of platforms. You can be instructions, to turn the sound On/Off, or to quit. Beast Hunt The objective is to find and kill the beast with an arrow before it incinerates you or you fall into one of several Beast Hunt 98 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 105
    radio. They may or may not hear you and members of your group on their own radios. Squelch codes act as a filter, blocking your FRS radio from hearing other unwanted FRS users. Remember though, these are public-use frequencies and everyone has a right to talk or listen in. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 106
    receiving FRS radio, the signal will not be received. Smaller obstructions, such as trees, cars and even crowds of people cause some loss of signal, resulting in reduced maximum range. GMRS The use of a GMRS (General Mobile Radio Service) radio Rino 130 units sold in Canada. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 107
    g) with batteries Temperature Range: -4° to 158° F (-20° to 70° C) (operating range) Display: 1.4" H x 1.4" W (3.6 cm x 3.6 cm) 160 x 160 pixels, high-contrast LCD Performance GPS Receiver: WAAS DGPS corrections) and RS-232 for PC interface Antenna: Quad-helix Rino® 130 Owner's Manual 101
  • Garmin RINO 130 | Owner's Manual - Page 108
    temperature decreases. Extensive use of screen backlighting and the radio significantly reduces battery life. Different brands of batteries vary in performance. 45, 5, 90 Duty Cycle - 5% receive with audio unmuted, 5% transmit and 90% standby (receive with audio muted) 102 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 109
    -For getting accustomed to your Rino basic operations quickly. MapSource Map Data CD-ROMs-An excellent tool for creating waypoints and routes on your PC and downloading them to your Rino. NiMH Battery Charger-Includes NiMH battery charger and 4 AA NiMH batteries. PC Data Cable and 12-volt Adapter
  • Garmin RINO 130 | Owner's Manual - Page 110
    6. U.S. Topo 7. Roads and Recreation 8. WorldMap Map data transfer requires the use of a PC, a Garmin MapSource CD-ROM, and the PC Interface Cable with RS-232 serial port connector supplied with this unit. Follow detailed instructions for data transfer in the MapSource User's Manual. Rino® 130 Owner
  • Garmin RINO 130 | Owner's Manual - Page 111
    the cable is pushed all the way into the back of the unit. 4. Turn on the Rino 130 and follow instructions for map data transfer provided in the MapSource User's Manual. See also the Interface Setup Page section for unit interface settings. APPENDIX > TRANSFERRING MAPSOURCE DATA Rino® 130 Owner
  • Garmin RINO 130 | Owner's Manual - Page 112
    Map Setup Map option and activate the check box. Access the Tracks Page, highlight the On button and press the Thumb Stick In. Use the Map Page Setup Page to reduce map clutter or change the map scale. Highlight the on-screen button and then press the Thumb Stick In. 106 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 113
    APPENDIX > RADIO TROUBLESHOOTING GUIDE Radio Troubleshooting Guide Symbol Probable Cause Remedy Radio not transmitting Messages not being received by others. keys except Talk will work. Rino® 130 Owner's Manual Talk key may not be fully depressed FRS/GMRS Radio feature may not be on. Incorrect
  • Garmin RINO 130 | Owner's Manual - Page 114
    one radio may not be available on other radios. Charts showing the different Squelch Codes and manufacturers can be located on the Internet. NOTE: For use in countries outside of the U.S. or Canada, please check with that government for any restrictions on FRS or GMRS use. Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 115
    6000 18R 467.6250 19R 467.6500 20R 467.6750 21R 467.7000 22R 467.7250 Receive Frequency (MHz) 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 GMRS Repeater 4 GMRS Repeater 5 GMRS Repeater 6 GMRS Repeater 7 GMRS Repeater 8 APPENDIX > FREQUENCY CHARTS Rino® 130 Owner's Manual 109
  • Garmin RINO 130 | Owner's Manual - Page 116
    Computer Page Only.) Location (selected)-The lat/lon of point defined on map. (Trip Computer Page Only.) Maximum Ascent-The maximum ascent rate in feet per minute. (Altimeter Page Only.) Maximum Descent-The maximum descent rate in feet per minute. (Altimeter Page Only.) 110 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 117
    Page Only.) Moving Avg. Speed-Average speed of the unit while moving. Odometer-A running tally of distance travelled, based in order to get back to the original course. APPENDIX > DATA FIELD DEFINITIONS Trip Odometer-A running tally of distance travelled since last . Rino® 130 Owner's Manual 111
  • Garmin RINO 130 | Owner's Manual - Page 118
    hard-wired to a serial connector using a Data Only Cable. Refer to the wiring diagram and the Rino 130 unit data connection illustrated below. The PC Interface Cable provided with this unit allows you to connect your Rino 130 to a PC-compatible computer's serial port. 112 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 119
    and receiver. • Connect the equipment into an outlet that is on a different circuit than the receiver's circuit. • Consult the dealer or an experienced radio/TV technician for help. The Rino 130 does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service
  • Garmin RINO 130 | Owner's Manual - Page 120
    Rino 130 two-way radio operates on General Mobile Radio Service (GMRS) frequencies regulated by the Federal Communications Commission (FCC) in the United States. Operation on the GMRS frequencies is subject to additional rules as specified in 47 CFR Part can download the Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 121
    to repair or replace the unit or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for
  • Garmin RINO 130 | Owner's Manual - Page 122
    Taiwan for service. The Garmin Rino 130 has no user-serviceable parts. Should you ever encounter a problem with your unit, please take it to an authorized Garmin dealer for repairs. The Rino 130 is fastened shut with screws. Any attempt to open the case to change or modify the unit in any way will
  • Garmin RINO 130 | Owner's Manual - Page 123
    the export control laws of the United States of America. APPENDIX > SOFTWARE LICENSE AGREEMENT Product Registration Help us better support you by completing our online registration today! Have the serial number of your Rino 130 handy and connect to our Web site (http://www.garmin.com). Look for the
  • Garmin RINO 130 | Owner's Manual - Page 124
    and receiver. When it is on, it receives and also sends out radio frequency (RF) signals. In August 1996, The Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless radios. Those guidelines are consistent with 118 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 125
    your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Rino® 130 Owner's Manual 119
  • Garmin RINO 130 | Owner's Manual - Page 126
    your radio OFF when in a "blasting area" or in areas posted: "Turn off two-way radio." Obey all signs and instructions. Potentially Explosive Atmospheres-Turn your radio OFF and do not remove your battery when would normally be advised to turn off your vehicle engine. 120 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 127
    Battery icon 6 Battery Life 102 Battery Type, Changing 87 Bearing 32 Bearing Pointer 32, 34, Rino® 130 Owner's Manual INDEX Data Fields 28, 34, 40, 41, 71 Definitions 110 For Route Page 71 Data Garmin sentences 112 General Mobile Radio Service 1 GMRS 1, 7, 10, 15, 99 Goto 52, 53, 54, 55, 56, 64 GPS
  • Garmin RINO 130 | Owner's Manual - Page 128
    Radio 17 Radio Page 7 Informational Picture 18 Setup Radio 14 Weather Radio 17 Re-Sight 35 Recently Found Places 61 Reference note 88 Restore Defaults 26, 38, 42 Reverse Route 66 Review Route 67 Ring Tone 16 Roger Tone 16 Routes 65 Copy 67 Create 65 Data Fields 71 Delete 67 Rino® 130 Owner's Manual
  • Garmin RINO 130 | Owner's Manual - Page 129
    14, 100 Setup Map 26, 29 Page 80 Radio 14 Scanlist 16 TD field 82 Time Page 80 Tones 16 Rino® 130 Owner's Manual Shortcut Menu 5, 46 Show Data Fields 34 Sight 'N Go 34, 35 Signal Strength 76 Sky View 76 Specifications 101 Squelch codes 10, 99 Status Bar 6 Status Bar Icons 6 Stop Navigation 26, 34 Sun
  • Garmin RINO 130 | Owner's Manual - Page 130
  • Garmin RINO 130 | Owner's Manual - Page 131
  • Garmin RINO 130 | Owner's Manual - Page 132
    free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin web site at www.garmin.com. © Copyright 2003-2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
owner’s manual
130
2-way radio & personal navigator
®