Garmin Rino 520HCx Owner's Manual - Page 14
Transferring Data to a microSD Card, To install or remove the microSD card - battery
UPC - 753759066833
View all Garmin Rino 520HCx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Getting Started Transferring Data to a microSD Card To install or remove the microSD card: 1. Remove the battery pack from the back of the unit by turning the locking D-Ring and lifting up. 2. Locate the card tray at the center of the battery compartment. 3. If you want to install the card, slide the tray cover forward, then lift up to insert the card in the tray. Be certain the card contacts are facing down. To transfer map data to the microSD card: 1. Lift the weather cover from the USB port on the upper back of the unit. It is recommended that you use the USB port rather than the serial connection port for faster data transfer. 2. Connect the USB cable provided with the unit to the USB port on your computer and to the miniUSB port on the back of the unit. 3. Follow instructions for selecting and downloading maps provided with the MapSource® map data disk. See page 60. USB Port - under weather cover microSD card tray is located beneath the battery on the back of the unit. Slide the tray cover back to OPEN, then lift to remove or insert the microSD card. Close and slide back to LOCK. Detail of microSD card tray in Battery Compartment Back of Rino Rino 520HCx and 530HCx Owner's Manual