HP 226593-B21 Smart Array 5i Plus Controller and Battery Backed Write Cache En - Page 27
Running Options ROMPaq from the Smart Array Controller Support Software CD, Compaq, System Utilities
UPC - 720591665913
View all HP 226593-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Updating the Controller Firmware Running Options ROMPaq from the Smart Array Controller Support Software CD 1. Place the Smart Array Controller Support Software CD in the server CD-ROM drive. 2. Restart the server. 3. When the Compaq System Utilities screen is displayed, select Run Options ROMPaq and then press the Enter key. 4. When the Welcome screen is displayed, press the Enter key. 5. On the Select A Device screen, select All Compaq Smart Array nnnn Controller(s) from the list of programmable devices, and then press the Enter key. 6. The action that you must now take depends on the message on the screen: - If the screen message reads as follows, press the Enter key, and then go to step 8 of these instructions: The ROM image files found for the device selected are not newer than the current ROM image - If the ROM firmware currently on the controller is older than that on the Options ROMPaq diskette, then the screen message reads as follows: Device to reprogram: All Compaq Smart Array nnnn Controller(s) Controller(s) Current ROM revision: Compaq Smart Array nnnn Controller x.xx Select Firmware Images: Compaq Smart Array nnnn Controller y.yy In this case, press the Enter key and then go to step 7. 7. Review the information on the Caution screen, and then press the Enter key to reprogram the controller ROM. The following message is displayed: Reprogramming Firmware Do not interrupt the reprogramming process. You will be notified when reprogramming is complete. 5-2 Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide