HP 226593-B21 Smart Array 5i Plus Controller and Battery Backed Write Cache En - Page 68
Migrating RAID Level or Stripe Size, Expand, Rebuild, Priority, Logical Configuration View, Enter
UPC - 720591665913
View all HP 226593-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Configuring an Array Migrating RAID Level or Stripe Size Performance may be degraded slightly during migration, depending on the Expand (or Rebuild) Priority setting. To minimize any effect, migrate during periods of low server use. NOTE: The migration process takes about 15 minutes per gigabyte. The controller is not able to expand or migrate any other logical drive during this time. Instead, further requests for expansion or migration will be queued. 1. Back up all data on the logical drive. Although migration is unlikely to cause data loss, observing this precaution provides extra security. 2. Verify that the array accelerator batteries (if present) are fully charged. 3. In the Logical Configuration View panel, select the logical drive that you want to migrate, and then press the Enter key. 4. Select Drive Settings and then press the Enter key. 5. Change the RAID level or stripe size shown on this screen. 6. Press the Esc key to accept the changes and begin migration. You can check the progress of the migration at any time by pressing the F3 key and then scrolling to the progress bar near the bottom of the screen. 7-34 Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide