HP 2500 HP Color LaserJet 2500 series - User Guide - Page 141
Installing an HPJetdirect print server card
View all HP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Installing an HP Jetdirect print server card 1 You can install an optional HP Jetdirect print server card in the 2500L or 2500 model printer, which comes with an EIO slot. To install an HP Jetdirect print server card 1 Turn the printer off and disconnect the power cable and the parallel or USB (interface) cable. 2 Locate the EIO slot. Loosen and remove the two retaining screws holding the cover for the EIO slot onto the printer, and then remove 2 the cover. 3 Firmly insert the HP Jetdirect print server card into the EIO slot. Insert and tighten the retaining screws that came with the print server card. 4 Connect the network cable. 5 Reconnect the power cable, and turn the printer on. 3 6 Print a Configuration page at the printer by pressing (GO) and (CANCEL JOB) simultaneously. In addition to a printer Configuration page and a Supplies Status page, an HP Jetdirect configuration page should print. If it does not print, uninstall and reinstall the print server card to ensure that it is completely seated in the slot. Note 4 If the configuration page does not print in your language, see "Special pages" on page 56. 7 Perform one of these steps: 4 q Choose the correct port. See the computer or operating system documentation for instructions. q Reinstall the software, choosing the network installation this 5 time. ENWW Appendix D Working with memory and print server cards 139