HP 2500 HP Color LaserJet 2500 series - User Guide - Page 34
Loading optional tray2, To load optional tray 2
View all HP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
1 Loading optional tray 2 Optional tray 2 supports standard-size paper only. Paper includes average-weight letterhead and prepunched paper. For additional information about letterhead and prepunched paper, see "Printing on letterhead or preprinted forms" on page 47. CAUTION 2 Print special print media such as labels and grayscale transparencies from tray 1 only. Printing special print media from optional tray 2 or optional tray 3 can cause jams. To load optional tray 2 1 Pull optional tray 2 out of the printer and remove any paper. 2 Move the side width guides to match the size of paper you are 3 loading. 3 Extend the rear of the tray until the arrow on the markings points to the size you are loading. 4 Load the paper. If this is special paper such as letterhead, load it with the side to be printed down and the top edge toward the front of the tray. 4 Note If you are manually duplexing, see "Printing on both sides (duplexing manually)" on page 48 for loading instructions. 5 Make sure the stack of paper is flat in the tray at all four corners, and keep it below the height tabs on the paper length guide in the rear of the tray. Push down on the metal paper lift plate to lock it into 5 place. 6 Slide the tray back into the printer. If you set the rear of the tray to one of the longer sizes, the back of the tray will protrude from the back of the printer. 6 32 Printing tasks ENWW