HP 2500 HP Color LaserJet 2500 series - User Guide - Page 71
To clear jams from output areas, If the leading edge of the paper is visible from the rear opening - fuser
View all HP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
1 To clear jams from output areas CAUTION Jams in these areas might result in loose toner on the page. If you get toner on your clothes or hands, wash them in cold water. (Hot water will set the toner into the fabric.) 1 Complete one of these steps: 2 q If the paper is not almost completely visible from the top output bin, go to step 2. q If the paper is almost completely visible, pull it carefully out of the printer and go to the last step. 2 Open the rear output door. 3 If the leading edge of the paper is visible from the rear opening, 3 carefully pull the paper out. 4 If the jam is too far into the printer to remove, turn off the printer and disconnect the power cable. 5 Rotate the locks on the fuser to the unlocked position. 4 5 ENWW Chapter 4 Problem solving and maintenance 69