HP 2500 HP Color LaserJet 2500 series - User Guide - Page 69

To clear jams from inside the printer, described - toner cartridge

Page 69 highlights

1 To clear jams from inside the printer CAUTION Jams in this area might result in loose toner on the page. If you get toner on your clothes or hands, wash them in cold water. (Hot water will set the toner into the fabric.) 1 Open the top cover. 2 2 Remove the imaging drum by pushing it away from you and lifting it out of the printer. You cannot reach jams by removing the print cartridges. 3 Complete one of these steps: q If the leading edge of the paper is visible, carefully pull the paper out of the printer. 3 q If the paper is too difficult to remove, remove the jam as described in "To clear jams from output areas" on page 69. 4 After the jam has been removed, replace the imaging drum and close the top cover. 5 Press (GO) if the Go light is blinking. If the Attention light is still blinking, then another jam is present. See "To clear jams from input areas" on page 68 and "To clear jams from output areas" on 4 page 69. ENWW Chapter 4 Problem solving and maintenance 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152

ENWW
Chapter 4 Problem solving and maintenance
67
To clear jams from inside the printer
CAUTION
Jams in this area might result in loose toner on the page. If you get toner
on your clothes or hands, wash them in cold water. (Hot water will set
the toner into the fabric.)
1
Open the top cover.
2
Remove the
imaging drum
by pushing it away from you and lifting it
out of the printer. You
cannot
reach jams by removing the print
cartridges.
3
Complete one of these steps:
If the leading edge of the paper is visible, carefully pull the paper
out of the printer.
If the paper is too difficult to remove, remove the jam as
described in
“To clear jams from output areas” on page 69
.
4
After the jam has been removed, replace the imaging drum and
close the top cover.
5
Press
(
G
O
) if the Go light is blinking. If the Attention light is still
blinking, then another jam is present. See
“To clear jams from input
areas” on page 68
and
“To clear jams from output areas” on
page 69
.
3
1
2
4