HP 2500 HP PCL/PJL reference - Printer Job Language Technical Reference Manual - Page 46

COMMENT Command The COMMENT command enables you to add a line of information as a comment. Use this command whenever you want to add an explanation to PJL commands. Syntax: @PJL COMMENT remarks [] Parameters: Parameter remarks Range Roman-8 character codes 33 through 255 and , starting with a printable character. Comments: The COMMENT command is useful for documenting lines of PJL commands. Comments may be placed anywhere in the PJL code between the initial UEL command and the ENTER command. (Comments placed after the ENTER command are considered personality-specific data and are printed as determined by the active printer language.) Like other PJL commands, the COMMENT command is terminated by a line feed character. You cannot extend comments onto the next line. Comments longer than one line require a separate COMMENT command for each line. See the following page for an example demonstrating the use of the COMMENT command. Example: Using the COMMENT Command This example demonstrates using the COMMENT command to add clarity to your PJL command listings. %-12345X@PJL @PJL COMMENT CR> @PJL COMMENT ** D. Thiel- 10/22/92 ** @PJL COMMENT CR> @PJL 4-6 Kernel Commands EN