HP 2500 HP PCL/PJL reference - Printer Job Language Technical Reference Manual - Page 94

Variables LINETERMINATION PITCH PTSIZE SYMSET PCL-Specific Variables (continued) Description Sample Value Range Sets the default PCL line termination 0, 1, 2, 3 value: 0: CR = CR, LF = LF, FF = FF (no change) 1: CR replaced by CR-LF, LF = LF, FF = FF 2: CR = CR, LF replaced by CR-LF, FF replaced by CR-FF 3: CR replaced by CR-LF, LF replaced by CR-LF, FF replaced by -->CR-FF Pitch of the default font in units of 0.44, 0.45, . . . characters per inch (the default font 99.99 must be a fixed-pitch scalable font). The pitch value can be specified to two decimal places. Height of the default font in units of 4.00, 4.25, . . . points (the default font must be a 999.75 proportional scalable font). The point size is significant to a quarter of a point. Symbol set. (If the currently selected ROMAN8, ISOL1, SYMSET is WIN3.1J, then the default ISOL2, ISOL5, PCL text parsing method is set to ISOL6, PC775, Shift-JIS compatible parsing [WIN3.1J PC8, PC8DN, is only available in the HP LaserJet 4PJ, PC850, PC852, the HP LaserJet 4LJ Pro, and the HP PC8TK, PC1004, LaserJet 4V/4MV when ESC/P is WINL1, WINL2, installed].) WINL5, DESKTOP, PSTEXT, On the HP LaserJet 4LC printer, if the MSPUBL, MATH8, SYMSET is GB2312 the default PCL PSMATH, PIFONT, text parsing method is set to LEGAL, ISO4, GB-compatible parsing. [GB2312 is ISO6, ISO11, only available in the HP LaserJet 4LC ISO15, ISO17, printer.] ISO21, ISO60, ISO69, WIN30, WIN31J, WINBALT, GB2312, MCTEXT 6-30 Environment Commands EN