HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message R - Page 13
Event Messages, Alarm events, Table 4 Alarm events and recommended action
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Event Messages This section lists and describes event messages from the switch, Simple SAN Connection Manager, QuickTools, and Enterprise Fabric Management Suite in message ID sequence by severity level. NOTE: You can look for a message by its message ID or by searching for the message text. If the message you are looking up does not appear in this section, contact your authorized maintenance provider. Alarm events Alarm events require action before you can proceed any further. Table 4 shows the icon for alarm events and the Event ID number and message displayed, and provides a description of the meaning of the message and recommended action to take. Table 4 Alarm events and recommended action Icon Event ID and message Description Action (A1000.000F) (The switch is canceling the hotreset - try again later) You cannot move forward with the hot reset. All applications and switch resources are backing out of the procedure and returning to normal operation. Ensure that the fabric is stable and that no changes are being made to switch configurations or connections and then try again. (A1000.001D) (Hotreset failed and the switch must be reset normally) (A1000.001E) (Hotreset failed and the switch is being reset) The hot reset has failed and left the switch in an indeterminate state. There was a failure during the hotreset process; the switch is being reset normally. Reset the switch. None (A1003.000B) (Failing release of fabric lock held by switch with domain domain_ID) The local switch is locked because zoning changes are being made by a remote switch. Wait for the lock to time out and try again. (A1003.000C) (Fabric Busy, failing lock request from domain domain_ID) (A1003.000D) (Fabric already locked by domain domain_ID) The command failed because the fabric is busy with another command in progress. Wait10 seconds and retry the command. The switch given by the domain_ID has locked the fabric. Unlock the domain_ID lock on the switch given by domain_ID. (A1003.000E) (Couldn't acquire lock from domain domain_ID) The fabric may be changing, Wait for the fabric to and therefore could not stabilize, then try again. acquire the lock. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide 13