HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message R - Page 21

Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1004.000F) (Eport Isolating due to Merge Zone Failure) An inter-switch link (ISL) failed because the two active zone sets have a zone with the same name, but different members. Modify one or both of the zones so that their membership is the same, or deactivate one of the active zone sets. To connect the two fabrics, reset the affected E_Ports. (A1004.0010) (Eport Isolating due to Remote switch using same domain ID) An E_Port isolated because the remote switch has the same domain ID. Change the domain ID on one of the switches. (A1004.0011) (Eport Isolating due to Remote switch isolated) An E_Port isolated because of Change the domain ID on a domain ID conflict with a one of the switches. remote switch. (A1004.0012) (Eport Isolating due to ISL Security) A remote switch attempted to log in but was rejected because it failed to satisfy the ISL group membership requirements. Review the ISL group configuration and make the necessary corrections to include the remote switch as a member. (A1004.0013) (Eport Isolating due to all switches incapable of becoming Principal Switch) An E_Port isolated because the principal priority on all switches is set to 254. Configure one of the switches to be the principal switch by changing the principal priority. (A1004.0014) (Eport Isolating due to TOV mismatch indicated on ELP) An E_Port isolated because the Resource Allocation Timeout Value (R_A_TOV) or Error Detect Timeout Value (E_D_TOV) time out values are different on the two switches. Modify the switch configurations so that R_A_TOV or E_D_TOV values are the same. (A1004.0015) (Eport Isolating due to Invalid Attach) An E_Port isolated because of invalid attachment. Check for invalid attachment due to security or authentication incompatibility. (A1004.0020) (R_A_TOV mismatch indicated. Reconfigure to connect to remote switch.) An E_Port isolated because the R_A_TOV timeout values on the two switches do not match. Modify R_A_TOV so that it is the same on both switches. The recommended value is 10 seconds. (A1004.0021) (E_D_TOV mismatch indicated. Reconfigure to connect to remote switch.) An E_Port isolated because the E_D_TOV timeout values on the two switches do not match. Modify E_D_TOV so that it is the same on both switches. The recommended value is 2 seconds. (A1004.0023) (Attempting to connect to switch with incompatible time out value configured (R_A_TOV/E_D_TOV).) An E_Port isolated because the values for R_A_TOV or E_D_TOV are not the same on both switches. Modify the switches so that the time out values are the same. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide 21