HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message R - Page 16

Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1003.002D) (Zone Merge response indicates failure to merge, Isolating link) The attempt to merge two fabrics failed because each active zone set contained a zone with the same name, but different membership. Edit the affected zone to remove the conflict or deactivate one of the zone sets. (A1003.002E) (Zoning merge has been rejected.) The attempt to merge two fabrics failed because the active zone sets contained a zone with the same name, but different membership. Either edit the affected zone to remove the conflict, or deactivate one of the zone sets. (A1003.002F) (SW2 Zoning Not Supported by other switch, Isolating link) The Fabric inter-switch link (ISL) isolated because the local switch is configured for FC-SW-2-compliant zoning (interoperability mode set to Standard), but the remote switch is not. Set the interoperability mode on the remote switch to Standard. (A1003.0030) (Zone Merge rejected by remote switch.) The zone merge failed. See the switch log for more details on why the merge failed. (A1003.0031) (Error reading zoneset from activate direct.) A device supporting the management server has sent an azsd (Activate Zoneset Direct) command that did not follow the expected standard layout. Contact your authorized maintenance provider. (A1003.0032) (Zoneset zone_set_name failed validity checks (empty or contains empty zone/alias)) The zone set either has no zones or contains a zone or alias without members. Add zones and members, or remove the empty zones and aliases from the zone set. (A1003.0033) (No memory Insufficient switch memory. for command completion) Contact your authorized maintenance provider. (A1003.0034) (Merge failed, total zoneset limit would be exceeded.) (A1003.0035) (Merge failed, invalid zone data received, ISOLATING) (A1003.0036) (Merge failed, member limit for zone zone_name exceeded, (size= member_number, limit= member_limit)) A fabric merge failed because the combined number of zone sets exceeds the zoning database limit. Remove zone sets from the local switch zoning database to allow the fabric merge to complete. A remote switch sent a zone merge that was invalid. Reconcile interoperability modes on the local and remote switches so that they are the same. A fabric merge failed because the combined number of members in two zones having the same name exceeds the limit for the number of members in a zone. Remove members from the zone on either the local switch or the remote switch, so that the combined sum is less than member limit. 16