HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message R - Page 23

Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1004.0036) (Domain ID domain_ID assigned to different switches. Cannot join fabrics.) An attempt was made to join two fabrics that had switches with the same domain_ID. Change the domain_ID on one of the switches so that it is unique, and then join the fabrics again. (A1004.0037) (Fabric Binding Error - please reconfigure: Local switch assigned domain domain_ID which is locked, fabric binding indicates domain domain_ID should be used.) The local switch has a conflicting domain ID and cannot be automatically reassigned because the domain ID is locked. Change the domain ID of the local switch. (A1004.0038) (WorldWide Name (WWN) device_WWN assigned domain domain_ID, fabric binding indicates this domain is reserved for device_WWN.) A fabric binding configuration was activated that conflicts with the current domain ID assignment. Change the domain ID of the device. (A1004.0039) (WorldWide Name (WWN) device_WWN currently in fabric, no fabric binding in active security set for this WWN.) Fabric binding failed due to security incompatibility. Check the security settings of the named device. (A1004.003F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not allowed to join fabric.) The switch with the specified Add the switch to a group in worldwide name (WWN) is the active security set. not allowed to join the fabric. (A1004.0040) (World Wide Name (WWN) device_WWN assigned domain domain_ID, fabric binding indicates it should use domain_ID.) A fabric binding configuration was activated that conflicts with the current domain ID assignment. Change the domain ID of the named device, and then reconfigure the fabric. (A1004.0041) (Eport isolating due to E_Port License Exceeded.) An E_Port isolated because all licensed E_Ports are in use. Obtain a license key to license additional E_Ports. (A1004.0043) (Forcing Domain ID change due to Interoperability setting from old_domain_ID to new_domain_ID.) The domain ID of the switch is changed due to an interoperability configuration change. The old domain ID does not conform to the range of allowed domain IDs for the new interoperability setting. None HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide 23