HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message R - Page 19
Configuration UFC message, zone set no longer resides
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1003.0053) (Fabric binding must be unique, domains are assigned to multiple security group members The fabric binding settings for the members of the ISL group are not unique. Make the fabric binding settings unique for each member of the ISL group, or set them to 0 so that they are not enforced. (A1003.0054) (Failure at remote switch) A frame was sent to a remote Check the status of the remote switch, but the expected switch. response was not received. (A1003.0055) (Problem on zoning save of following switches: domain_ID_list) A zoning save could not be performed on some remote switches. Examine the named switches. If there are no obvious problems, contact your authorized maintenance provider. (A1003.0058) (Active ZoneSet zone_set no longer in database, please deactivate zoneset if not already in progress or fabric will be inconsistent) A zone set with the same Deactivate the active zone set name as the current active to keep the fabric consistent. zone set no longer resides within the zoning database. The active zone set will not be added to the full zone set sequence, because if it is, the fabric will end up with an inconsistent zoning database. (A1003.0059) (Failing remote zoning configuration, zone member type not supported) The remote switch's zoning configuration contains a zone member type that is not supported. Edit the zone to remove the unsupported member type. (A1003.0060) (Zone Merge conflict (Alias mismatch for alias= alias, check members) The zone merge failed due to Examine the zoning an alias mismatch. configuration for conflicts. (A1003.0062) (Failing delete orphans zoning request, fabric locked by switch with domain ID domain_ID. Retry command later.) An attempt was made to delete the orphan zones while the fabric was locked. Retry the command later. (A1003.0063) (Failing delete orphans zoning request, fabric busy. Retry command later.) An attempt was made to delete the orphan zones while the fabric was busy. Retry the command later. (A1003.0064) (UFC failure received from domain domain_ID) An Update Fabric Configuration (UFC) message was received with a failed status from the switch given by domain_ID. Check the status of the switch at the given domain ID. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide 19