HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message R - Page 18
Challenge Handshake, Authentication Protocol
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1003.0048) (Active Zone Set zoneset_name no longer in database, please deactivate zone set if not already in progress (the save will be deferred until zone set no longer active!) The switch will not allow you to delete a zone set that has the same name as the active zone set from the zoning database. Deactivate the active zone set before deleting the zone set that has the same name as the active zone set from the zoning database. (A1003.004C) (Active ZoneSet containing Fibre Channel Address may cause fabric to segment due to switches that do not support this zone member type) Some switches in the fabric may not support Fibre Channel (FC) address zone members in the active zone set. Edit the necessary zone sets to use worldwide name (WWN) zone membership. (A1003.004D) (Port group does not contain entry for this switch) The security set cannot be activated because the port group does not have an entry for the local switch worldwide name (WWN). Edit the port group to include the local switch WWN. (A1003.004E) (Group entry for local switch does not support authentication) The local switch worldwide name (WWN) group entry is not configured for authentication, but other members within the group are. This configuration is not allowed. Change the local switch WWN entry to run Challenge Handshake Authentication Protocol (CHAP) authentication or remove CHAP authentication from other members of the group. (A1003.004F) (No Zone Merge Response) A merge request was sent out to all switches in the fabric but a response was not received from at least one switch. Check other switches in fabric to determine why a response was not sent. (A1003.0050) (ISL group does not contain entry for this switch) The ISL group does not contain an entry for the local switch worldwide name (WWN). This is a required entry. Add the switch WWN to the ISL group, then activate the security set. (A1003.0051) (Domain ID for local switch does not match fabric binding) The configured fabric binding value for the local switch worldwide name (WWN) does not match the current domain ID for the switch. Change the fabric binding value for local switch WWN within the ISL group to the current value of the domain ID. (A1003.0052) (ISL group does not contain entry for switch domain_ID) The ISL group does not contain an entry for each switch in the fabric. Fabric binding requires an entry for each switch. Make sure there is an entry in the ISL group for each switch in the fabric and try activating the security set again. 18