HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message R - Page 32

Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1007.000F) (Security: Chap session Gen Response indicates error, chap unable to authenticate) An Authentication Response frame cannot be built because the Challenge Handshake Authentication Protocol (CHAP) session is not in the right state. The port will isolate. Check the remote device for a possible error condition. Reset the port to retry again. If errors continue, disable CHAP for this device if it belongs in the fabric. (A1007.0010) (Security: Chap session Receive Challenge indicates bad state, chap unable to authenticate) The Challenge Handshake Authentication Protocol (CHAP) session is not in the correct state for a Challenge message. Port will isolate. Check the remote device for a possible error condition. Reset the port to retry again. If errors continue, disable CHAP for this device if the device belongs in the fabric. (A1007.0011) (Chap failure, isolating with Invalid Attach) Frame does not match format for a Challenge Handshake Authentication Protocol (CHAP) status frame. Ports will isolate. Check the remote device for a possible error condition. Reset the port to retry again. If errors continue, disable CHAP for this device if the device belongs in the fabric. (A1007.0012) (Port with World Wide Name (WWN) port_WWN address FC_address not authorized to login, verify MS security configuration) The port cannot login with the Add the named port to the current security configuration. Management Server group in the active security set. (A1007.0013) (Response from address FC_address, lacks authentication, discarding) A response received on the indicated port lacked Common Transport (CT) authentication. Verify that the CT security configuration of the management application using the remote port is compatible with the configuration of the Management Server security group on the switch. (A1007.0014) (Response from WorldWide Name (WWN) device_WWN address FC_address, failed authentication, discarding) A request received on the indicated port failed Common Transport (CT) authentication. Verify that the CT security configuration of the management application using the remote port is compatible with the configuration of the Management Server security group on the switch. (A1007.001C) (Security: Bad Authentication Flags) The received AUTH frame did not meet the standard format for the frame payload. Within the header portion of the payload, there are some flags that are supposed to be set to zero (0). This frame has the flags set to something other than zero (0). Check the remote device for a possible error condition. Reset the port to retry again. If errors continue, disable Challenge Handshake Authentication Protocol (CHAP) for this device if it belongs in the fabric. 32