HP C8174A HP Business Inkjet 2800 - User Guide - Page 50
Control-panel messages, Message, Description
View all HP C8174A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Control-panel messages The following table describes some of the common control-panel messages. For information on: z Replacing the printheads or ink cartridges: See Replacing the ink cartridges and Maintaining the printheads. z Loading paper: See Loading media. Message Description CLOSE ALL COVERS The printer cannot print because one or more of the covers is open. Ensure all covers are properly closed. ENSURE REAR ACCESS PANEL IS PROPERLY CLOSED The rear access panel is not closed properly. Push it in firmly until it locks into place. [TRAY X OR ACCESSORY] NOT AVAILABLE... The tray or auto-duplex unit is not available. To use media from another tray or print without duplexing, press (Resume button). To cancel the print job, press (Cancel button). CARRIAGE STALL... Something is preventing the carriage from moving. Open the top cover, clear the obstruction, and then press (Resume button) to continue printing. LOAD [SIZE] MEDIA IN TRAY [X]. PRESS RESUME TO CONTINUE. LOAD [TYPE][SIZE] MEDIA IN TRAY [X]. PRESS RESUME TO CONTINUE. The specified tray is either empty or contains media whose type and/or size are different from what have been selected for the print job. Load the correct media into the tray, and press (Resume button) to continue printing. PAPER JAM... Media is jammed in the printer. See Clearing jams. PRINTED PAGE IS DRYING. PRESS RESUME TO CONTINUE. The printer is waiting for the printed page to dry before continuing to print. You can remove the page from the output tray (handle it carefully to avoid smearing the ink), and press (Resume button) to start printing the next page. REMOVE PRINTED PAGES FROM OUTPUT TRAY. PRESS RESUME TO CONTINUE The output tray is full. Remove the printed pages and press (Resume button) to continue printing. REPLACE INCOMPATIBLE OR FAULTY [COLOR] PRINTHEAD REPLACE INCOMPATIBLE OR FAULTY [COLOR] INK CARTRIDGE The printhead or ink cartridge is either incompatible or faulty. Replace with a HP printhead or ink cartridge to continue printing. INSTALL [COLOR] PRINTHEAD INSTALL [COLOR] INK CARTRIDGE The printhead or ink cartridge is either missing or not installed correctly. Ensure the printhead or ink cartridge is in its correct color-coded slot, and press down firmly to ensure proper contact. INK LOW IN [COLOR] CARTRIDGE The ink cartridge is running low on ink and will need to be replaced soon. Press (Resume button) to clear this message. REPLACE EMPTY [COLOR] INK CARTRIDGE REPLACE EXPIRED [COLOR] INK CARTRIDGE The ink cartridge is either empty or has expired. Replace with a HP ink cartridge to continue printing. 48 5 - Control panel ENWW