HP C8174A HP Business Inkjet 2800 - User Guide - Page 59
Cfg Ipx/spx, En_8023, En_ii, En_snap, Single R, All Rt, Security, Reset, Cfg Link, 100tx Half
View all HP C8174A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Message CFG IPX/SPX WEB SECURITY CFG LINK Value or Submenu NO YES HTTPS HTTP/HTTPS KEEP RESET NO YES Description Selects whether to use the IPX/SPX menu and set the IPX/SPX protocol parameters. In the IPX/SPX menu, you can specify the frame type parameter used on your network. z The default is AUTO, which automatically sets and limits the frame type to the first one detected. z For Ethernet networks, frame type selections include EN_8023, EN_II, EN_8022, and EN_SNAP. z For Token Ring networks, frame type selections include TR_8022 and TR_SNAP. In the submenu for Token Ring cards, you can also specify the NetWare Source Routing parameter, which can be AUTO (default), OFF, SINGLE R, or ALL RT. For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. z HTTPS: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. z HTTP/HTTPS: Access using either HTTP or HTTPS is permitted. Specify whether the current security settings on the print server will be saved or reset to factory defaults. z KEEP (default): The current security settings are maintained. z RESET: Security settings are reset to factory defaults. Selects whether you want to manually configure the HP Jetdirect 10/100Base-TX print server's network link speed and communication mode. The HP Jetdirect settings must match the network. The default setting is NO, which bypasses the link configuration menu items. If you specify YES, you can select one of the following link configuration menu items: z AUTO (default): The print server automatically configures itself to match the link speed and communication mode of the network. If it fails, 100TX HALF will be set. z 10T HALF: 10 Mbps, half-duplex operation z 10T FULL: 10 Mbps, full-duplex operation z 100TX HALF: 100 Mbps, half-duplex operation z 100TX FULL: 100 Mbps, full-duplex operation ENWW Changing networking parameters from the control panel 57