HP Cisco MDS 9120 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 123

Chapter 1 Basic System Commands show sprom Send comments to [email protected] show sprom To display the contents of the serial PROM (SPROM) on the switch, use the show sprom command. show sprom {all | backplane | fex {chassis_ID {all | backplane | powersupply ps-num} | all} | module module-number | powersupply ps-num | sup} Syntax Description all Displays the SPROM contents for all components on the physical device. backplane Displays the SPROM contents for the backplane. fex (Optional) Displays information about the attached Fabric Extender units. chassis_ID (Optional) Specifies a Fabric Extender chassis ID. Chassis ID is 100 to 199. module module-number Displays the SPROM contents for a I/O module. The module number range is from 1 to 3. powersupply ps-num Displays the SPROM contents for a power supply. The power supply number range is 1 or 2. sup Displays the SPROM contents for the active supervisor module. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) 4.0(1a)N2(1) Modification This command was introduced. This command was modified to provide Fabric Extender support. Usage Guidelines The SPROM on the switch contains detailed information about the hardware, including serial, part, and revision numbers. If you need to report a problem with a system component, you can extract serial number information using the show sprom command. Examples This example shows how to display SPROM information for all components on the physical device: switch# show sprom all This example shows how to display SPROM information for the backplane: switch# show sprom backplane This example shows how to display SPROM information for an attached Fabric Extender: switch# show sprom fex 101 OL-16599-01 Cisco Nexus 5000 Series Command Reference 1-101