HP Cisco MDS 9120 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 625

Chapter 8 Fibre Channel Commands interface fc Send comments to [email protected] Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines You can specify a range of interfaces by entering a command with the following example format: interface fc 1/1 - 5 , fc 2/5 - 7 Refer to the Cisco Nexus 5000 Series CLI Configuration Guide for information on port number allocation. Use the no shutdown command to enable the interface. The channel-group auto command enables autocreation of port channels. If autocreation of port channels is enabled for an interface, you must first disable this configuration before downgrading to earlier software versions or before configuring the interface in a manually configured channel group. Examples The following example configures ports 1 to 4 in Fibre Channel interface 3: switch(config)# interface fc 3/1 - 4 The following example enables the Fibre Channel interface in port 1 of slot 3: switch(config)# interface fc 3/1 switch(config-if)# no shutdown Related Commands Command show interface shutdown Description Displays an interface configuration for a specified interface. Disables and enables an interface. OL-16599-01 Cisco Nexus 5000 Series Command Reference 8-91