HP Cisco MDS 9120 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 143

Chapter 1 Basic System Commands terminal width Send comments to [email protected] terminal width To set the number of character columns on the terminal screen for the current line for a session, use the terminal width command. To revert to the default, use the no form of this command. terminal width columns terminal no width Syntax Description columns Number of columns. The range is from 24 to 511. Command Default For a virtual terminal, the width is set during negotiation with the client software. Otherwise, 80 columns is the default. Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines The terminal width setting applies only to the current session. Examples This example shows how to set the number of columns to display on the terminal: switch# terminal width 70 This example shows how to revert to the default number of columns: switch# terminal no width Related Commands Command show terminal Description Displays the terminal session configuration. OL-16599-01 Cisco Nexus 5000 Series Command Reference 1-121