HP Cisco MDS 9120 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 318

class-map Chapter 5 Quality of Service Commands Send comments to [email protected] class-map To create or modify a class map and enter the class-map configuration mode, use the class-map command. To remove a class map, use the no form of this command. class-map class-map-name no class-map class-map-name Syntax Description class-map-name Name assigned to the class map. The name class default is reserved. Command Default None Command Modes Global configuration. Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines You can define a class map for each class of traffic to be used in QoS policies. Examples This example shows how to create or modify a class map: switch(config)# class-map my_class1 switch(config-cmap)# This example shows how to remove a class map: switch(config)# no class-map my_class1 Related Commands Command policy-map show class-map Description Creates or modifies a policy map. Displays class maps. Cisco Nexus 5000 Series Command Reference 5-2 OL-16599-01