HP Cisco MDS 9120 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 500

logging module Chapter 7 System Management Commands Send comments to [email protected] logging module Use the logging module command to enable module log messages. Set a specified severity level or use the default. To disable module log messages, use the no form of this command. logging module [severity-level] no logging module Syntax Description severity-level (Optional) The number of the desired severity level at which messages should be logged. Messages at or numerically lower than the specified level are logged. Severity levels are as follows: • 0-emergency: System unusable • 1-alert: Immediate action needed • 2-critical: Critical condition • 3-error: Error condition • 4-warning: Warning condition • 5-notification: Normal but significant condition-default level • 6-informational: Informational message only • 7-debugging: Appears during debugging only Command Default None Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples This example shows how to enable module log messages: switch(config)# logging module Related Commands Command Description show logging module Displays the module logging status. 7-14 Cisco Nexus 5000 Series Command Reference OL-16599-01