HP Cisco MDS 9120 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 191

Chapter 2 Ethernet Commands private-vlan synchronize Send comments to [email protected] private-vlan synchronize To map the secondary VLANs to the same MST instance as the primary VLAN, use the private-vlan synchronize command. private-vlan synchronize Syntax Description This command has no keywords or arguments. Command Default None Command Modes MST configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines If you do not map secondary VLANs to the same MST instance as the associated primary VLAN when you exit the MST configuration mode, the device displays a warning message that lists the secondary VLANs that are not mapped to the same instance as the associated VLAN. The private-vlan synchronize command automatically maps all secondary VLANs to the same instance as the associated primary VLANs. Examples This example shows how to initialize PVLAN synchronization: switch(config)# spanning-tree mst configuration switch(config-mst)# private-vlan synchronize Related Commands Command show spanning-tree mst configuration spanning-tree mst configuration Description Displays information about the MST protocol. Enters MST configuration mode. OL-16599-01 Cisco Nexus 5000 Series Command Reference 2-43