HP Cisco MDS 9120 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 646

port-security database Chapter 8 Fibre Channel Commands Send comments to [email protected] port-security database To copy the port security database or to view the difference within the port security database, use the port-security database command. port-security database {copy | diff {active | config}} vsan vsan-id Syntax Description copy diff active config vsan vsan-id Copies the active database to the configuration database. Provides the difference between the active and configuration port security database. Writes the active database to the configuration database. Writes the configuration database to the active database. Specifies the VSAN ID. The ranges is 1 to 4093. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines If the active database is empty, the port-security database is empty. Use the port-security database diff active command to resolve conflicts. Examples The following example copies the active to the configured database: switch# port-security database copy vsan 1 The following example provides the differences between the active database and the configuration database: switch# port-security database diff active vsan 1 The following example provides information on the differences between the configuration database and the active database: switch# port-security database diff config vsan 1 8-112 Cisco Nexus 5000 Series Command Reference OL-16599-01