HP Cisco MDS 9120 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 493

Chapter 7 System Management Commands logging console Send comments to [email protected] logging console Use the logging console command to enable logging messages to the console session. To disable logging messages to the console session, use the no form of this command. logging console [severity-level] no logging console Syntax Description severity-level (Optional) The number of the desired severity level at which messages should be logged. Messages at or numerically lower than the specified level are logged. Severity levels are as follows: • 0-emergency: System unusable • 1-alert: Immediate action needed • 2-critical: Critical condition-default level • 3-error: Error condition • 4-warning: Warning condition • 5-notification: Normal but significant condition • 6-informational: Informational message only • 7-debugging: Appears during debugging only Command Default None Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples This example shows how to enable logging messages with a severity level of 4 (warning) or higher to the console session: switch# configure terminal switch(config)# logging console 4 Related Commands Command Description show logging console Displays the console logging configuration. OL-16599-01 Cisco Nexus 5000 Series Command Reference 7-7