HP J7934A HP Jetdirect Administrator's Guide - Page 128

Firmware Upgrade For print servers that support firmware upgrades, this page allows you to upgrade the print server with new features. Note HP Jetdirect ew2400 print servers will have limited upgrade capabilities. A network cable must be used. A firmware upgrade through a wireless connection is not supported. The firmware upgrade file for the print server must be available on your system. To identify and retrieve the appropriate upgrade file, visit HP online support at: http://www.hp.com/go/webjetadmin_firmware On that page, do the following: 1. Locate the print server model and the upgrade file. 2. Check the upgrade file version and verify that it is more recent than the print server's installed version. If it is, then download the file. If not, then you do not need to upgrade. To upgrade the print server using the embedded Web server: 1. Enter the path to the upgrade file or click Browse to locate it. 2. Then click Upgrade Firmware. LPD Queues The LPD Queues page allows you to specify LPD (line printer daemon) print queues on the Jetdirect print server. For more information on LPD printing and print queues, see Chapter 5, "Configuring for LPD Printing". LPD printing must be enabled on the print server before you can set LPD queues. If LPD is disabled, go to the Misc. Settings tab to enable it. If LPD printing is enabled, ten different named print queues are available. Four of these queues are configured automatically and their parameters cannot be changed. The remaining six queues can be defined by the user. The six user-defined queues can be set up with character strings -such as job control commands -- that are automatically added before ENWW Using the Embedded Web Server 128