HP J7934A HP Jetdirect Administrator's Guide - Page 227
Table 9.11, Error Messages 3 of 11, HP Jetdirect Configuration
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Table 9.11 Error Messages (3 of 11) Error Code and Message Description 14 DISCONNECTED The Novell NetWare protocol is disconnected. Check the server and the print server. 15 CONFIGURATION ERROR (Ethernet) The configuration information for the NetWare functions is not stored correctly on the HP Jetdirect print server. Use the installation software, embedded Web server, or other tools to reconfigure the print server. If this error persists, there may be a problem with the HP Jetdirect print server. 16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been configured for NetWare. Use the installation software, embedded Web server, or other tools to configure the print server for NetWare networks. 17 UNABLE TO FIND SERVER (Ethernet) The HP Jetdirect print server was unable to find the NetWare print server (Remote Printer mode) or file server (Queue Server mode). (There was no response to service queries for advertising print servers or file servers that matched the configured print server or file server name.) Make sure that the print server or file server is running and that the print server or file server name configured on the HP Jetdirect print server matches the actual name used by the print server or file server. Also make sure that all cables and routers are functioning correctly. 18 PASSWORD ERROR The HP Jetdirect print server detected that the password for the NetWare print server object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the password for the print server object. When the HP Jetdirect print server logs on again, it sets a new password. Note: When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers are connected. 19 NO QUEUE ASSIGNED The HP Jetdirect print server detected that the print server object has not been assigned any queues to service. Assign queues to the print server object using printer installation or NetWare utilities. Note: When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers were successfully connected. 1A PRINTER NUMBER NOT DEFINED A NetWare printer number for this printer has not been configured. Assign a valid printer number to the HP Jetdirect print server. Use a NetWare utility (such as PCONSOLE), the Jetdirect embedded Web server, or other tool to assign a printer number. ENWW HP Jetdirect Configuration Page 227