HP J7934A HP Jetdirect Administrator's Guide - Page 52
Table 3.3, TFTP Configuration File Parameters 3 of 12, TCP/IP Configuration 52
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Table 3.3 TFTP Configuration File Parameters (3 of 12) ipp-printing: (ipp-config:, ipp:) Enables or disables the ability to print through IPP: 0 disables, 1 (default) enables. lpd-printing: (lpd-config:, lpd:) Enables or disables LPD (Line Printer Daemon) printing services on the Jetdirect print server. 0 disables, 1 (default) enables. banner: A port-specific parameter that specifies printing an LPD banner page. 0 disables banner pages. 1 (default) enables banner pages. interlock: (interlock-mode:) Specifies whether an acknowledgement (ACK) on all TCP packets is required before the printer is allowed to close a Port 9100 print connection. A Port Number and Option value are specified. For current HP Jetdirect print servers, the Port Number is 1. Option value 0 (default) disables interlock, 1 enables. For example, "interlock 1 1" specifies Port 1, interlock enabled. buffer-packing: (packing:) Enables or disables buffer packing for TCP/IP packets. 0 (default): is normal, the data buffer is packed before sending to the printer. 1: disables buffer packing, data is sent to the printer as it is received. write-mode: Controls the setting of the TCP PSH flag for device-to-client data transfers. 0 (default): disables this option, flag is not set. 1: all-push option. The push bit is set in all data packets. mult-tcp-conn: Enables or disables multiple TCP connections. 0 (default): allows multiple connections. 1: disables multiple connections. TCP/IP Raw Print Ports raw-port: (addrawport:) Specifies additional ports for printing to TCP port 9100. Valid ports are 3000 to 9000, which are application-dependent. ENWW TCP/IP Configuration 52