HP J7934A HP Jetdirect Administrator's Guide - Page 58

Table 3.3 TFTP Configuration File Parameters (9 of 12) ipx-unit-name: A user-assigned alphanumeric name assigned to the print server (31 characters maximum). By default, the name will be NPIxxxxxx, where xxxxxx are the last six digits of the LAN hardware address. ipx-frametype: Specify the IPX frame type setting available for your print server model: AUTO (default), EN_SNAP, EN_8022, EN_8023, EN_II. ipx-sapinterval: Specifies the time interval (1 to 3600 seconds) that the HP Jetdirect print server waits between Service Advertising Protocol (SAP) broadcasts on the network. The default is 60 seconds. 0 disables SAP broadcasts. ipx-nds-tree: Identifies the name of the Novell Directory Services (NDS) tree for this printer. ipx-nds-context: An alphanumeric string, up to 256 characters, that specifies the NDS context for the HP Jetdirect print server. ipx-job-poll: Specifies the time interval (seconds) that the HP Jetdirect print server will wait to check for print jobs in a print queue. pjl-banner: (ipx-banner:) Enables or disables printing an IPX banner page. 0 disables banner pages. 1 (default) enables banner pages. pjl-eoj: (ipx-eoj:) Enables or disables IPX end-of-job notification. 0 disables, 1 (default) enables. pjl-toner-low: (ipx-toner-low:) Enables or disables IPX toner-low notification. 0 disables, 1 (default) enables. AppleTalk appletalk: (at-config:, ethertalk:) Enables or disables AppleTalk (EtherTalk) protocol operation on the print server: 0 disables, 1 (default) enables. name-override: (External print servers only) Specifies the name of the AppleTalk network. Up to 32 characters may be used. ENWW TCP/IP Configuration 58