HP J7934A HP Jetdirect Administrator's Guide - Page 51

Table 3.3 TFTP Configuration File Parameters (2 of 12) TCP/IP Main host-name: (sys-name:, name:) Specifies the node name that will appear on the Jetdirect configuration page. Default is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware address. parm-file: Specifies the path and file name whose contents are sent to the printer for printing each time the print server is powered on. The path and filename entry is limited to 64 alphanumeric characters. domain-name: The domain name for the device (for example, support.hp.com). It does not include the host name; it is not the Fully Qualified Domain Name (such as printer1.support.hp.com). pri-dns-svr: (dns-srv) The IP address of the DNS (Domain Name System) server. sec-dns-svr: The IP address of a secondary DNS server to use if the primary DNS server is unavailable. pri-wins-svr: (pri-wins-srv:) The IP address of the primary Windows Internet Naming Service (WINS) server. sec-wins-svr: (sec-wins-srv:) The IP address of the secondary Windows Internet Naming Service (WINS) server. smtp-svr: The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP) server, for use with supported Scan devices. TCP/IP Print Options 9100-printing: (9100-config:) Enables or disables printing to TCP port 9100 on the print server. 0 disables, 1 (default) enables. ftp-printing: (ftp-config:, ftp:) Enables or disables the ability to print through FTP: 0 disables, 1 (default) enables. ENWW TCP/IP Configuration 51