HP J7934A HP Jetdirect Administrator's Guide - Page 249

Graphical Control Panel Graphical control panels typically display 18 characters on a line, and as many as four lines at a time. In addition, scrolling may be supported to allow display of additional lines. MENUS + XXXXXXXXXX + XXXXXXXXXXXX + XXXXXXXX ? On graphical control panels, a numeric keypad and navigation buttons are used to access HP Jetdirect menu items. For a description of menu items and options, see Table B.2. Table B.2 HP Jetdirect Graphical Control Panel Menu (1 of 4) Menu Item TCP/IP Options ENABLE HOST NAME CONFIG METHOD Description of settings ON: Enable the TCP/IP protocol OFF: Disable the TCP/IP protocol An alphanumeric string, up to 32 characters, used to identify the device. This name is listed on the Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Specifies the method that TCP/IP parameters will be configured on the Jetdirect print server. ● BOOTP: Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. ● DHCP: Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCP server. If selected and a DHCP lease exists, DHCP RELEASE and DHCP RENEW menus will be available to set DHCP lease options. ● AUTO IP: Use automatic link-local IP addressing. An address in the form 169.254.x.x will be automatically assigned. ● MANUAL: Use the MANUAL SETTINGS menu to configure TCP/IP parameters. ENWW The HP Jetdirect EIO Control Panel Menu 249