HP J7934A HP Jetdirect Administrator's Guide - Page 60
Table 3.3, TFTP Configuration File Parameters 11 of 12, TCP/IP Configuration 60
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Table 3.3 TFTP Configuration File Parameters (11 of 12) usb-mode: Specifies the communication mode over the USB port on the HP Jetdirect print server. ● Auto (default): Automatically negotiates and sets the the highest communication mode possible for the attached printer or device. ● MLC: (Multiple Logical Channels) An HP-proprietary communication mode that allows multiple channels of simultaneous print, scan and status communications. ● BIDIR: A standard connection that supports bi-directional communications between the printer and print server. The print server sends print data and receives status from the printer. ● UNIDIR: A standard connection in which data is transferred in one direction only (to the printer). status-page-lang: Specifies the page description language (PDL) that the print server will use to send the Jetdirect configuration/status page to the printer. ● Auto (default): The PDL is auto-detected when the print server is powered on or after a cold-reset. ● PCL: Hewlett-Packard Printer Control Language ● ASCII: Standard ascii characters ● HPGL2: Hewlett-Packard Graphics Language (v2) ● PS: Postscript language network-select: (For HP Jetdirect products with a dual wired/wireless port, such as model ew2400) Specifies the active behavior of the print server. ● Auto (default): Automatically detects whether a network cable is attached. If a network cable is not attached, only the IEEE 802.11g wireless port will be active. However, if a network cable is attached, then only the IEEE 802.3 wired port will be active. Use caution when plugging in a network cable on an active wireless network. Wireless access to the device will be terminated. ● Wired: Only the 802.3 wired port will be active. ● Wireless: Only the 802.11g wireless port will be active. ENWW TCP/IP Configuration 60